Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 67-21SUGC/S400-A5/TR8 67-21SUGC
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 67-21SUGC / S400-A5 / TR8
- Type
- EVERLIGHT
- Minimum package
- 2000 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- EVERLIGHT
- Electronic Component
- 67-21SUGC/S400-A5/TR8
- Electronic Component
- 1
- Package
- SMD3528-2P
- Electronic Component
- 525nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.054g
- Electronic Component
- 1
- LED
- 250mcd~432mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0227160082
- Electronic Component
- 518nm
- Operating Temperature
- 40℃~+85℃
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
EVERLIGHT 67-21SUGC/S400-A5/TR8 产品概述
一、产品简介
67-21SUGC/S400-A5/TR8 为台湾亿光（EVERLIGHT）推出的贴片发光二极管，封装为 SMD3528-2P，发光颜色为翠绿色，透镜为无色透明。器件适合作为面板指示、背光与一般照明指示用途，兼顾高亮度与宽视角的显示需求。
二、主要技术参数
- 发光颜色：翠绿色（显色）
- 峰值波长：518 nm；波长中心约 525 nm
- 正向压降 (Vf)：3.5 V ~ 4.3 V
- 发光强度：250 mcd ~ 432 mcd（典型测试条件见厂方数据）
- 发光角度：120°（宽视角）
- 工作温度：-40 ℃ ~ +85 ℃
- 封装：SMD3528-2P，透明透镜
- 品牌/型号：EVERLIGHT / 67-21SUGC/S400-A5/TR8
三、产品特性
- 色彩纯正、光谱集中，峰值在 518 nm，视觉上呈翠绿色高显色。
- 宽视角（120°）适合面板及指示灯的均匀照明要求。
- 透镜透明，发光均匀、光学损耗小。
- 封装体积小，适合高密度贴装与自动化生产。
- 宽工作温度范围，适应一般工业及民用环境。
四、典型应用
- 仪表、控制面板的状态指示灯
- 家用电器与消费电子指示与背光
- 小型标识、指示标志及装饰照明
- 工业设备面板、测试仪器指示
五、设计与焊接建议
- 驱动方式：建议恒流驱动或加限流电阻使用，常见测试与应用 IF = 20 mA。
- 限流电阻示例（供参考）：若采用 5 V 电源，按 Vf 平均取 3.9 V，则 R = (5 − 3.9) / 0.02 ≈ 56 Ω。实际取值请依据实际 Vf 与亮度需求调整。
- 调光：推荐 PWM 调光以获得线性亮度控制与色彩稳定性；长时间满流工作会缩短寿命，应适度降额。
- 热管理：虽为低功耗元件，但应避免长期高温环境运行；高温下建议降低驱动电流（按厂方热降额曲线）。
- 焊接工艺：遵循常规 SMD 回流工艺并参考厂方回流曲线，回流峰值温度通常不建议超过 260 ℃，具体以厂方资料为准；避免二次焊接加热。
- 防静电与防潮：为半导体器件，应采取 ESD 防护并注意湿敏包装与回流前预烘烤要求。
六、可靠性与存储
- 存储环境建议干燥、常温，避免直接阳光与潮湿。
- 出厂前应参考数据手册的寿命与光衰曲线进行设计裕量，长期高温或超额流会加快光衰与失效。
- 在关键或严苛环境（如车规级）使用前，确认是否满足相应认证或采用经证实的替代型号。
如需具体的测试条件、光电参数曲线或封装尺寸图，请参考 EVERLIGHT 官方数据手册或联系供应商获取完整资料，以便在产品开发中准确选型与可靠性评估。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
