Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 12-21/S2C-FR2S2L/2C 12-21
Configuration
1 options
Configuration
23+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 12-21 / S2C-FR2S2L / 2C
- Type
- EVERLIGHT
- Minimum package
- 2000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- EVERLIGHT
- Electronic Component
- 12-21/S2C-FR2S2L/2C
- Electronic Component
- 1
- Package
- SMD,3x2mm
- Electronic Component
- 603nm~609nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.033g
- Electronic Component
- 1
- LED
- 140mcd~285mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0264372243
- Electronic Component
- 611nm
- Operating Temperature
- 40℃~+85℃
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
12-21/S2C-FR2S2L/2C 产品概述 — EVERLIGHT（亿光）橙色SMD LED
一、产品简介
12-21/S2C-FR2S2L/2C 是台湾亿光（EVERLIGHT）推出的一款橙色表面贴装（SMD）LED，封装尺寸约为3 × 2 mm。该器件采用无色透明透镜设计，发光颜色为橙色，峰值波长611 nm，光谱范围约在603–609 nm，呈现饱和的橙色视觉效果，适合需要醒目指示色的各类电子设备。
二、主要电光参数
- 发光颜色：橙色
- 正向压降（Vf）：1.7 V ～ 2.3 V
- 峰值波长：611 nm（光谱范围 603–609 nm）
- 发光强度：140 mcd ～ 285 mcd（通常测量条件下，如 If=20 mA，请以厂方数据表为准）
- 发光角度：120°（宽视角，视认性好）
- 透镜颜色：无色透明透镜
- 工作温度范围：-40 ℃ ～ +85 ℃
- 封装形式：SMD，尺寸 3×2 mm
三、特点与优势
- 紧凑封装：3×2 mm SMD 体积小，便于高密度贴装与自动化生产。
- 宽视角与高可见度：120°发散角配合较高的发光强度，在多数观察角度下仍保持良好可视性。
- 宽工作温度：-40 ℃ 到 +85 ℃，适用于室内及多数工业环境。
- 透明透镜还原度高，色彩纯净，适用于指示灯和信号显示场景。
- 来自亿光品牌，品质和供应链稳定，适合中高批量应用。
四、典型应用场景
- 面板指示灯、状态/电源指示
- 仪器仪表与工业控制面板
- 消费电子产品上的状态显示（路由器、机顶盒、家电等）
- 小型指示模组与符号照明
五、使用建议与注意事项
- 驱动电流：建议参考厂方数据表进行设计，常见应用下 If=20 mA 可获得较好亮度与寿命平衡。需根据驱动电路计算限流电阻或恒流驱动。
- 散热与热设计：虽然功耗较低，但长时间高电流工作会产生热量，建议在PCB布局时预留散热路径并避免高密度堆叠。
- 焊接工艺：建议采用符合电子行业标准的回流焊工艺，遵循厂方推荐的回流曲线与峰值温度，避免超温或长时间高温造成光衰或封装损伤。
- ESD 与静电保护：LED 对静电敏感，生产与装配过程中应采取静电防护措施。
- 清洁与维护：避免使用腐蚀性溶剂直接清洗发光面，必要时采用推荐的溶剂和方法。
六、包装与可靠性
- 常见包装形式为卷带（Tape & Reel），适合自动贴装生产线；具体包装数量与形式请参考供应商报价单或数据表。
- 器件在推荐工作条件下具有稳定的光学与电气特性；如需用于关键或极端环境（例如汽车关键部位或高温高湿环境），建议向厂商索取详细可靠性测试报告或进行额外测试验证。
如需更详细的电气特性曲线、光学分布图、封装尺寸图或回流焊推荐曲线，请告知，我可以协助查阅或整理对应的数据表。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
