Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
EVERLIGHT 333-2SURC/S530-A3 333-2SURC
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- EVERLIGHT 333-2SURC / S530-A3
- Type
- EVERLIGHT
- Minimum package
- 500
Technical parameters
- Electronic Component
- EVERLIGHT
- Electronic Component
- 333-2SURC/S530-A3
- Electronic Component
- 1
- Package
- Through-hole, D=5mm
- Electronic Component
- 624nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.5g
- Electronic Component
- 1
- LED
- 1.2cd
- LED
- 10°
- LED
- Electronic Component
- Electronic Component
- BM0228747224
- Electronic Component
- 632nm
- Operating Temperature
- 40℃~+85℃
- Current
- 20mA
- Type
- 5mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
333-2SURC/S530-A3 产品概述
一、产品简介
333-2SURC/S530-A3 为 EVERLIGHT（亿光）旗下单色红光 Hyper 系列 5mm 圆形插件 LED。该器件采用无色透明透镜及窄发散角设计（10°），以高亮度、方向性强为主要特性，适用于指示、指向照明、光束指示与精确光学耦合场合。
二、主要参数
- 封装：插件，D = 5mm 圆头
- 发光颜色：红色（单色）
- 峰值波长：632 nm（典型）
- 波长：624 nm（许用或典型范围）
- 正向压降 Vf：约 2.0 V（If = 20 mA）
- 额定正向电流 If：20 mA（最大/典型驱动）
- 发光角度：10°（窄束型）
- 透镜颜色：无色透明
三、电学与光学特性
在推荐工作点 If = 20 mA 时，器件表现出高光强与集束性。窄角度（10°）使光束密度高，适合需要定向光源的应用。电压约为 2 V，静态功耗低（约 40 mW），便于并联与串联混合应用。建议在需要延长寿命或降低热应力时，将工作电流适当下调（如 10–15 mA）。
四、机械与封装说明
标准 5mm 圆头插件封装，便于常规 PCB 插装与面板安装。透镜为透明形式以保证最小光学衰减。为获得可靠的机械与电气连接，安装时应保证焊点牢固并避免对透镜施加机械应力。
五、驱动与热管理建议
- 驱动方式：推荐恒流驱动，或在串联/并联配置中加入限流电阻。示例：5 V 电源下，R = (5 − 2.0) / 0.02 ≈ 150 Ω（可选 150–220 Ω）；12 V 电源下串联多个 LED 或使用恒流源。
- 热管理：LED 本体发热量小，但长期高电流会影响光衰与寿命，建议合理降低驱动电流或采用间歇驱动以改善散热。PCB 采用适当铜箔面积有利于热量扩散。
六、主要应用场景
- 精准指示与方向标识（仪表、控制面板）
- 光束指向装置、指示灯塔、定位装置
- 光学检测与传感器光源（需窄束光）
- 消费类电子与工业设备的高对比度指示
七、使用与存储注意事项
- ESD 防护：为半导体器件，装配和测试过程应做好防静电措施。
- 焊接建议：遵守厂商焊接曲线与时间限制，手工焊接建议在合适温度与短时间内完成；避免对 LED 本体长时间加热或浸泡。
- 眼部安全：10° 窄束、高亮度，避免长时间直视发光面以免不适。
- 存储条件：避免潮湿、高温及强光直射，建议密封防潮、储存在干燥环境中。
八、采购与替代建议
333-2SURC/S530-A3 适合需要高方向性红光的场合。若需替代，可选用同类 5mm 红光窄角插件 LED（参数匹配 Vf ≈2.0 V、If ≈20 mA、发束角约10°）以保证光学与电气性能一致。采购时注意核对波长、光强及透镜类型以满足系统设计要求。
如需更详细的绝对最大额定值、光谱曲线或焊接规范，请参照 EVERLIGHT 官方数据手册以获得完整工程参数。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
