Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
GOODWORK SB1060L
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- GOODWORK SB1060L
- Type
- GOODWORK
- Minimum package
- 5000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- GOODWORK
- Electronic Component
- SB1060L
- Electronic Component
- 1
- Package
- TO-277
- Electronic Component
- Schottky Diode
- Electronic Component
- 0.163g
- Electronic Component
- 1
- Electronic Component
- BM0230846347
- Current
- 10A
- Diode
- Electronic Component
- Current(Ir)
- 150uA
- (Vf)
- 650mV@10A
- Electronic Component
- Electronic Component
- Electronic Component
- 5000
- Voltage Rating(Vr)
- 60V
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SB1060L 产品概述
一、主要参数
SB1060L 为 GOODWORK（固得沃克）出品的高电流整流二极管，关键电气参数如下：
- 二极管配置：独立式（单只）
- 正向压降 (Vf)：0.65 V @ 10 A
- 直流反向耐压 (Vr)：60 V
- 最大整流电流：10 A（连续）
- 反向电流 (Ir)：150 μA（在 Vr 条件下）
- 非重复峰值浪涌电流 (Ifsm)：150 A
- 封装：TO-277（适合散热处理的大功率封装）
二、性能亮点
- 低正向压降：0.65 V 在 10 A 工作点时的正向压降相对较小，有利于降低导通损耗（在 10 A 时约为 6.5 W），适合高电流整流场合。
- 良好浪涌能力：150 A 的瞬态浪涌电流能承受开机、电容充电等瞬态冲击。
- 适中耐压：60 V 的反向耐压适用于多数中低压电源及电机驱动场景。
- 小反向漏电：150 μA 的反向电流在常温及正常工作电压下属可控范围，有助于降低空载损耗和提高系统稳定性。
三、典型应用场景
- 线性与开关电源的整流输出（单相或并联使用以分摊电流）
- 电池充放电管理、车载电源与逆变器（60 V 以下系统）
- 电机驱动回路的自由轮二极管、续流保护
- 工业控制设备、家用电器以及需要承受大电流瞬态的整流场合
四、热管理与可靠性建议
- 散热设计关键：在10 A 连续工作下，器件导通损耗显著（约6.5 W），建议配合合适的散热片或在实装PCB上做大面积铜箔散热并考虑强制风冷。
- 峰值能力注意事项：Ifsm 为非重复浪涌值，仅用于短时冲击，不可作为长期重复工作条件。
- 环境与寿命：请留意工作环境温度，并按厂商建议对结温进行限制与降额使用，以提高可靠性。
五、使用与设计注意事项
- 电压裕量：系统工作电压应低于 Vr，并保留一定裕量以防浪涌及瞬态过压。
- 并联使用：若需更高电流，可采用并联多只器件，但需做好均流措施（电阻分流或热匹配）。
- PCB 布局：建议在二极管引脚处设计宽铜带和热过孔，靠近散热片处添加螺纹或焊盘固定，减少接触热阻。
- 焊接与存储：遵循常规元件焊接温度曲线，避免长时间高温回流，存储时防潮防尘。
六、封装与采购信息
TO-277 封装利于固定与散热，适合需要外部热沉或螺栓紧固的应用。购买时请确认 GOODWORK（固得沃克）原厂型号及批次，核对完整的规格书和包装信息，以确保批次一致性与售后支持。
总结：SB1060L 在 60 V 以下的中低压大电流整流场合表现稳定，具有较低的导通压降和良好的浪涌承受力。合理的散热与设计注意事项能够显著提升其长期可靠性和效率。若需替代件或并联方案评估，可提供具体电气条件和工作环境以便进一步优化建议。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
