Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
GOODWORK SP0503BAHTG
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- GOODWORK SP0503BAHTG
- Type
- GOODWORK
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- GOODWORK
- Electronic Component
- SP0503BAHTG
- Electronic Component
- 1
- Package
- SOT-143
- Electronic Component
- Electronic Component
- Type
- ESD
- Electronic Component
- ESD and Surge Protection (TVS / ESD)
- Electronic Component
- 0.035g
- Electronic Component
- 1
- Channel Count
- Electronic Component
- Cj- Capacitor
- 30pF
- Electronic Component
- BM0257623401
- Operating Temperature
- 55℃~+125℃
- Voltage
- 10V
- Electronic Component
- IEC 61000-4-4；IEC 61000-4-5；IEC 61000-4-2
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SP0503BAHTG 产品概述
一、产品简介
SP0503BAHTG 是 GOODWORK（固得沃克）推出的一款单路双向瞬态电压抑制器（TVS），专为对低压高速接口与电源线提供静电放电（ESD）、浪涌与脉冲干扰保护设计。器件封装为 SOT-143，工作温度范围宽（-55℃～+125℃@Tj），适用于消费电子、工业控制与通信接口的瞬态过压防护场合。
二、主要规格与特性
- 极性：双向（无方向性，适合信号线上正负脉冲抑制）
- 反向截止电压 Vrwm：5V（适配 5V 类供电与接口）
- 击穿电压：6V
- 钳位电压：10V（在峰值脉冲条件下）
- 峰值脉冲电流 Ipp：10A
- 峰值脉冲功率 Ppp：150W（1ms 或典型标准脉冲条件下）
- 反向电流 Ir：1µA（在 Vrwm 条件下低漏电）
- 结电容 Cj：30pF（对高速信号有一定影响，需评估）
- 通道数：单路
- 工作温度：-55℃～+125℃（结温）
- 符合 IEC 61000-4-2 / 4-4 / 4-5 等抗扰度等级
三、典型应用场景
- 5V 电源线与信号接口保护（如 USB 及通用 I/O）
- 工业控制器与通信端口的浪涌与瞬态抑制
- 消费电子产品前端保护，防止操作或环境引发的静电放电损伤
- 对要求小封装与自动贴装的终端设备保护需求
四、设计与布局建议
- 将 TVS 器件尽量靠近被保护端（接口或芯片引脚）放置，以缩短寄生电感线路，提升响应速度和钳位效果。
- 对于敏感高速差分信号，注意 Cj=30pF 可能对信号完整性产生影响，必要时在设计中评估或选择更低电容规格。
- 器件为双向型，应并联于被保护线与参考地或对线之间；对电源线保护时并联于正负两端。
- 为提高整体抗扰度，可与串联阻抗（如阻容滤波）或共模滤波器配合使用。
五、可靠性与合规
SP0503BAHTG 提供符合 IEC 61000-4-2（ESD）、IEC 61000-4-4（EFT）与 IEC 61000-4-5（浪涌）等标准的抗扰能力，适合在需要通过这些电磁兼容测试的产品中应用。器件低漏电与宽温范围也提升了在苛刻环境下的可靠性表现。
六、封装与订购信息
- 封装：SOT-143，适合表面贴装（SMT）工艺与自动化生产。
- 通道数：单路（1-channel）。
建议在样品选型与批量采购前确认 GOODWORK 官方的完整规格书与包装代码，以获得最新的管脚定义与订购信息。
七、使用注意事项
- 请在正式量产前根据实际应用做 ESD、浪涌及信号完整性验证。
- 当系统对信号带宽或延迟非常敏感时，必须评估 30pF 的结电容对性能的影响。
- 遵循制造厂商的回流焊工艺建议，避免超过推荐的温度曲线以保证器件可靠性。
如需完整的电气特性曲线、瞬态响应图与封装尺寸图，请向 GOODWORK 索取 SP0503BAHTG 的正式数据手册，以便进行最终设计确认。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
