Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Gigadevice GD32F307VET6
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Gigadevice GD32F307VET6
- Type
- GIGADEVICE
- Minimum package
- 540 个
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- GIGADEVICE
- Electronic Component
- GD32F307VET6
- Electronic Component
- 1
- Package
- LQFP-100(14x14)
- Electronic Component
- MCU(MCU / MPU / SOC)
- Electronic Component
- 2.59g
- CPU
- ARM Cortex-M4
- I / O
- 80
- Electronic Component
- 1
- ADC
- 12bit
- DAC
- 12bit
- Electronic Component
- BM0231032499
- Operating Voltage
- 2.6V~3.6V
- CPU
- 120MHz
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
GD32F307VET6 产品概述
一、产品简介
GD32F307VET6 是兆易创新（Gigadevice）推出的一款高性能 32 位微控制器，基于 ARM Cortex-M4 内核，主频最高可达 120MHz。器件面向需要较高计算性能与丰富外设资源的嵌入式应用场景，提供大容量闪存与多路模拟/数字外设，便于快速开发与系统集成。
二、核心规格与资源
- 内核：ARM Cortex-M4，最高主频 120MHz
- 程序存储：512KB FLASH
- 通用 I/O：约 80 个可用 I/O 引脚
- AD/DA：12 位 ADC 与 12 位 DAC
- 工作电压：2.6V ~ 3.6V
- 封装：LQFP-100（14 × 14 mm）
以上参数适合对实时性和计算能力有要求的控制与信号处理应用。
三、关键外设与接口
GD32F307VET6 搭载丰富外设，常见包括多路定时器、高速 ADC、DAC、UART/USART、SPI、I2C、以及 USB 等常用通信接口，方便与传感器、存储器及上位机连接，支持多任务并行处理与复杂控制算法实现。
四、封装与电源管理
LQFP-100 封装利于焊接与散热，适合批量生产与原型验证。建议在电源设计上采用合适的去耦电容与滤波措施，遵循 2.6V~3.6V 的供电规范，并考虑地线与电源回路布局，以保证 ADC/DAC 的测量精度与系统稳定性。
五、典型应用场景
适用于工业控制、运动控制、数字信号处理、医疗仪器、智能家电与通信设备等需要高主频、丰富 I/O 与精确模数转换的场合。
六、设计注意事项
在系统设计与调试时，应注意 FLASH 编程与擦写策略、启动与时钟配置、外设电源与模拟地隔离、以及必要的软件看门狗与低功耗模式配置，以提高系统可靠性与抗干扰能力。
如需更详细的外围时序、引脚分配与参考电路，请参考器件数据手册与应用笔记。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
