Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Gigadevice GD32F350RBT6
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Gigadevice GD32F350RBT6
- Type
- GIGADEVICE
- Minimum package
- 960 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- GIGADEVICE
- Electronic Component
- GD32F350RBT6
- Electronic Component
- 1
- Package
- LQFP-64(10x10)
- Electronic Component
- MCU(MCU / MPU / SOC)
- Electronic Component
- 1.844g
- CPU
- ARM Cortex-M4
- I / O
- 55
- Electronic Component
- 1
- ADC
- 12bit
- DAC
- 12bit
- Electronic Component
- BM0228061932
- Operating Voltage
- 2.6V~3.6V
- CPU
- 108MHz
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
GD32F350RBT6 产品概述
GD32F350RBT6 是北京兆易创新（Gigadevice）推出的一款基于 ARM Cortex‑M4 内核的高性价比 32 位微控制器，面向需要中等计算性能与丰富模拟/数字接口的嵌入式应用。器件以 108 MHz 的最高主频运行，提供稳定的实时控制能力与精细的模拟信号处理能力，适合工业控制、消费电子、传感器前端等场景。
一、核心与存储
- CPU 内核：ARM Cortex‑M4，面向数字信号处理和控制任务，具备良好的指令执行效率。
- 最高主频：108 MHz，可满足中高要求的运算与控制频率。
- 程序存储：64 KB Flash，适用于中等规模固件与Boot方案。
- 工作电压：2.6 V ~ 3.6 V，兼容常见 3.3 V 电源设计，便于与外部传感器和接口配合。
二、接口与模拟功能
- 通用 I/O：55 个可用 I/O，引脚资源丰富，便于多外设同时接入与扩展子板设计。
- ADC：12‑bit 分辨率的模数转换，适合中高精度的传感信号采集与测量。
- DAC：12‑bit 数模转换，可用于波形输出、模拟控制量生成及校准信号等应用。
三、封装与硬件实现要点
- 封装：LQFP‑64（10×10），适合开发板与中小批量生产的焊接工艺。
- PCB 布局建议：模拟地与数字地分割、ADC/DAC 参考电源去耦、重要时钟线路短且屏蔽，55 路 I/O 布局预留扩展接口和布线走向。
四、典型应用场景
- 工业控制与仪表：中速采样、控制回路与人机界面驱动。
- 传感器节点与数据采集：多通道传感器信号采集与本地预处理。
- 消费电子与外设控制：按键/显示控制、音频信号简单处理与模拟输出。
- 教育与原型开发：LQFP‑64 封装利于开发板设计与调试。
五、开发与支持
GD32F350RBT6 可使用主流 ARM 开发工具链（如 Keil、IAR、GCC）进行软件开发。建议参考 Gigadevice 提供的资料、例程与芯片手册进行外设初始化与性能验证，确保 ADC/DAC 的采样与参考设计满足系统精度要求。
总结：GD32F350RBT6 在 108 MHz 的 Cortex‑M4 性能、12‑bit ADC/DAC 与 55 路 I/O 资源间取得均衡，适合对模拟精度与接口数量有较高要求但对超大程序空间不高的嵌入式产品。选型时请结合实际存储需求、外设数量和封装制程做进一步验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
