Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Infineon BTT6010-1ERA BTT6010
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Infineon BTT6010-1ERA
- Type
- TDSO-14
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- INFINEON
- Electronic Component
- BTT6010-1ERA
- Electronic Component
- 1
- Package
- TDSO-14
- Type
- Switch
- Electronic Component
- Power Electronic Switch
- Electronic Component
- 1g
- Electronic Component
- 1
- Channel Count
- 1
- Features
- Integrated Charge Pump
- Electronic Component
- BM0211495884
- Resistor
- 10mΩ
- Operating Temperature
- 40℃~+150℃
- Operating Voltage
- 5V~36V
- Current
- 9A
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
BTT6010-1ERA — 产品概述
一、产品简介
BTT6010-1ERA 是英飞凌（Infineon）推出的一款单通道高侧功率电子开关，适用于 5V 至 36V 工作电压范围的电源管理与负载控制场景。器件集成了过热保护（OTP）与过压保护（OVP），具有高达 9A 的最大连续导通能力，典型导通电阻仅 10 mΩ，并能在 -40℃ 至 +150℃ 的工作温度范围内可靠工作。输入控制逻辑为“高电平有效”，方便与微控制器等逻辑电路直接驱动。
二、主要特性
- 单通道高侧开关（通道数：1）
- 工作电压：5V ~ 36V
- 最大连续电流：9A
- 导通电阻（RDS(on)）：10 mΩ（典型）
- 过热保护（OTP）与过压保护（OVP）
- 输入控制逻辑：高电平有效（具体阈值请参见数据手册）
- 工作温度范围：-40℃ ~ +150℃
- 封装：TDSO-14
三、典型电气参数与功耗估算
在最坏工况下（9A 持续电流），导通损耗约为 P = I^2·R ≈ 9^2 × 0.01 = 0.81 W。实际损耗会随电流、结温与导通电阻随温度变化而上升，因此在 9A 持续工况下需重视散热和版面铜箔设计以维持结温在安全范围内。
四、封装与热管理
TDSO-14 封装提供较好的引脚布置与热路径，但在高电流应用中仍需通过 PCB 大面积散热铜箔或底部散热焊盘配合散热设计以降低结温。推荐在功率走线和器件底部增加热铜填充，并尽量缩短高电流回路长度以降低寄生阻抗与发热。
五、典型应用
- 汽车与商用车电源分配（需符合车规级要求时请核对型号与认证）
- 直流负载开关与保护（电机驱动、继电器替代）
- 工业电源管理与负载选择
- 电池保护与能量管理系统
六、使用建议
- 控制端为高电平有效，驱动电压与输入阈值请参照数据手册以保证可靠切换。
- 在高电流场合进行过流与热裕度评估，必要时进行电流限制或并联设计（并联需考虑匹配与均流措施）。
- 布局时优先考虑散热通路与低阻抗回路，输入侧加大电容去耦以抑制开关瞬态。
- 利用器件内置 OTP/OVP 作为保护手段，但系统级保护（例如电流检测与熔断）仍然必要。
七、选型与资料
BTT6010-1ERA 适合对体积、集成保护与中高电流开关性能有要求的场合。最终设计前请下载并阅读英飞凌官方数据手册，确认逻辑阈值、引脚定义、典型特性曲线与绝对最大额定值以完成可靠设计与量产验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
