Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
JSMSEMI XC6206P332MR
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- JSMSEMI XC6206P332MR
- Type
- JSMSEMI
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- JSMSEMI
- Electronic Component
- XC6206P332MR
- Electronic Component
- 1
- Package
- SOT-23
- Electronic Component
- (OCP)
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- 0g
- Electronic Component
- 1
- Electronic Component
- Linear Regulator(LDO)
- Electronic Component
- BM0262567339
- Operating Temperature
- 40℃~+85℃@(Ta)
- Output
- Electronic Component
- Output Voltage
- 1.5V~5V
- Output Current
- 300mA
- Output Type
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
XC6206P332MR 产品概述
一、产品简介
XC6206P332MR 是杰盛微（JSMSEMI）系列的线性稳压器（LDO），采用 SOT-23 小封装，面向对体积、噪声和可靠性有较高要求的便携式与嵌入式系统设计。该器件支持可调输出，输出电压覆盖 1.5V 至 5V 范围，最大输出电流 300mA，最大输入电压 6.5V，工作环境温度范围 -40℃ 到 +85℃（Ta）。
二、主要性能特点
- 输出类型：可调式单通道正输出，便于针对不同系统电压需求进行设定。
- 输出电流：典型 300mA，适合中小功率负载供电。
- 输入电压：最高支持 6.5V，兼容常见电池与电源轨。
- 纹波抑制：PSRR 约 40dB @ 1kHz，对电源噪声和开关干扰有良好抑制效果。
- 保护功能：具备短路保护及过流保护（OCP），在异常负载或短路情况下提高系统安全性与可靠性。
- 封装与外形：SOT-23 小型封装，便于空间受限的 PCB 布局与自动贴装。
三、典型应用场景
- 便携式设备：手持终端、便携仪表、小型消费电子。
- 嵌入式与物联网节点：单芯片微控制器供电、传感器子模块电源。
- 工业控制与通信设备：需要低噪声、稳定电源的小功率模块。
- 电池供电系统：输入电压范围和保护功能适合多种电池管理场景。
四、性能与设计注意事项
- 输出电容：为确保稳压器稳定工作，应按照器件推荐值选配输出电容（低 ESR 电容通常有助于提升瞬态响应和稳定性）。
- 散热：SOT-23 封装散热能力有限，高压差和高输出电流下会产生较大功耗，须注意PCB铜箔面积和热沉设计，以避免过热进入热关断或影响可靠性。
- 启动与瞬态：在负载突变或输入瞬变时，输出端的回升时间与电压跌落需在电路设计阶段验证，必要时可增加输入滤波与软启动电路。
- 布局建议：输入端靠近稳压器放置去耦电容，输入/输出走线尽量短且粗，地线采用单点回流以减少噪声耦合。
五、可靠性与保护机制
器件内置短路保护和过流保护（OCP），可在出现输出短路或长期过载时限制电流，保护芯片和负载。工作温度范围覆盖工业级常见需求（-40℃ 至 +85℃），在恶劣环境下仍能维持较好的电气性能。为提高系统整体可靠性，建议与外部保护元件（如熔断器、TVS）配合使用以防极端故障。
六、封装与采购提示
XC6206P332MR 提供 SOT-23 小封装，适合自动贴片生产。采购时请确认生产批次与规格书中对输出电压调节、外部电容要求及热特性的具体说明，以确保设计与实际器件参数一致。若需要更高电流或更低压差版本，可参考厂家的其他 LDO 产品线。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
