Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
kinghelm KH-TYPE-C-6P
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- kinghelm KH-TYPE-C-6P
- Type
- KINGHELM
- Minimum package
- 1500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- KINGHELM
- Electronic Component
- KH-TYPE-C-6P
- Electronic Component
- 1
- Package
- SMD
- Electronic Component
- USB Connector
- Electronic Component
- 0.56g
- (L)
- 6.8mm
- Electronic Component
- 1
- Electronic Component
- BM0264594935
- Electronic Component
- Electronic Component
- Operating Temperature
- 25℃~+85℃
- Electronic Component
- 1
- Electronic Component
- 1
- Electronic Component
- 6P
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
KH-TYPE-C-6P Type-C母座产品概述
一、产品核心定位与品牌背景
KH-TYPE-C-6P是金航标（kinghelm）针对小功率Type-C电源传输场景推出的卧贴式母座连接器。作为国内专注连接器研发10余年的厂商，金航标针对传统USB接口（如Micro USB）兼容性差、安装空间受限等痛点，优化推出这款精简型母座——既保留Type-C正反插的便捷性，又通过6Pin设计适配仅需电源的场景，平衡了性能、成本与体积。
二、关键参数与性能指标
产品核心参数覆盖安装、电气与环境维度，满足主流小功率设备需求：
参数类别 具体指标 备注 连接器类型 Type-C母座 标准Type-C接口形态 安装方式 卧贴SMD（表面贴装） 适配自动化贴片生产 触点数量 6Pin（电源+接地为主） 无数据传输Pin（精简设计） 额定电流（电源） 5A（DC） 满足多数小功率充电需求 工作温度范围 -25℃ ~ +85℃ 宽温环境适应性 触点材质 磷铜+镀金（3u"） 防氧化，降低接触电阻 插拔寿命 ≥1000次 满足日常使用损耗 接触电阻 ≤20mΩ 确保电源传输效率三、结构设计与工艺优势
卧贴SMD封装优化
采用紧凑卧贴设计，引脚高度≤1.5mm（典型值），大幅节省PCB正面空间；SMD引脚间距符合IPC标准，适配回流焊工艺，可直接集成到自动化生产线，减少人工成本与虚焊风险。6Pin精简适配
针对无需数据传输的场景（如纯充电），去除数据Pin，仅保留电源（VCC、GND）与识别Pin，既缩小连接器体积（长度≤10mm，宽度≤8mm），又降低物料成本，适合智能手环、充电盒等小型设备。耐高温壳体材质
外壳采用LCP（液晶聚合物）或PBT工程塑料，耐温性匹配-25℃~+85℃工作范围，可承受回流焊高温（260℃/10s），避免焊接变形。触点可靠性设计
触点采用磷铜基底+3u"镀金工艺，有效防止氧化腐蚀；弹片弧形设计，插拔时接触面积稳定，减少磨损，延长使用寿命。
四、安装与可靠性保障
安装便捷性
SMD引脚无需钻孔，直接贴装PCB表面；引脚带定位柱，焊接时精准对齐，避免偏移；适配无铅回流焊曲线，符合RoHS环保要求。环境适应性
宽温范围覆盖户外低温（-25℃）与室内高温（+85℃）；壳体默认IPX0，可定制IPX4防溅水，满足日常使用；抗振动性能符合GB/T 2423.10标准，适合便携式设备。正反插安全设计
保留Type-C核心优势——正反均可插拔，避免Micro USB插反损坏；6Pin布局对称，插入自动识别电源极性，提升使用体验。
五、典型应用领域
KH-TYPE-C-6P因体积小、成本低，广泛应用于：
- 小型消费电子：蓝牙音箱、无线耳机充电盒、便携式充电宝（≤20W）、智能手环充电口；
- 智能家居设备：智能灯控制器、温湿度传感器、小型遥控器、智能门锁应急充电口；
- 工业辅助设备：低功耗数据采集器、小型传感器模块、便携式测试仪器电源接口；
- 车载小配件：车载蓝牙适配器、行车记录仪（小功率）、车载香薰机电源接口。
六、总结
KH-TYPE-C-6P是一款专为小功率Type-C电源应用定制的卧贴母座，通过精简设计平衡体积、成本与性能，适配自动化生产与宽温环境，是替代传统Micro USB、优化设备接口的理想选择。金航标依托成熟工艺，确保产品一致性与可靠性，满足下游客户对小型化设备的充电需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
