Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
MEIHUA MHT150CGCT
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- MEIHUA MHT150CGCT
- Type
- MEIHUA
- Minimum package
- 3000 编带
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- MEIHUA
- Electronic Component
- MHT150CGCT
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- 567.5nm~575.5nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.028g
- Electronic Component
- 1
- LED
- 57mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0228233707
- Electronic Component
- 575nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MHT150CGCT 产品概述
一、产品简介
MHT150CGCT 为 MEIHUA(美华) 出品的 1206 封装黄绿色发光二极管，透明透镜，发光颜色黄绿色（峰值 575nm）。器件在典型正向电流 20mA 下，发光强度约 57 mcd，发光角度宽达 130°，适用于指示、面板指示与一般背光场合。
二、电气与光学特性
- 正向电流（If）：20 mA（最大连续推荐值）
- 正向压降（Vf）：1.75 V ～ 2.35 V
- 峰值波长：575 nm；波长范围：567.5 nm ～ 575.5 nm
- 光强：57 mcd（典型）
- 发光角：130°
- 功率：60 mW（器件最大耗散参考）
- 工作温度：-40℃ ～ +85℃
电路设计建议：必须串联限流电阻以控制电流。例：5 V 系统时，为保证不超过 20 mA，按最小 Vf 1.75 V 计算 R≈(5−1.75)/0.02≈162.5 Ω，常用 180 Ω。3.3 V 系统常用 82 Ω 或 100 Ω。电阻功耗 P≈I^2R，安全裕度充足。
三、封装与机械信息
1206（3216 米制）表贴封装，透明圆顶/平面透镜，有利于大视角分布。推荐遵循厂商或 IPC 标准的 PCB 焊盘尺寸与锡膏印刷，避免过多铜箔导致焊点不充分。
四、热管理与可靠性
工作环境温度范围宽，但高温下需对正向电流做降额处理以延长寿命。焊接推荐采用符合 J-STD-020 的回流工艺，Pb-free 峰值温度 ≤260℃，尽量减少高温停留时间并避免多次回流。器件对湿度与静电敏感，未密封卷带在高湿环境下应烘烤处理后贴装；生产与测试过程注意 ESD 防护。
五、应用场景
适合状态指示、家用电器面板、通信设备指示、仪表照明、一般电子玩具与指示灯条等。若用于汽车关键安全系统，请确认供应商的汽车级认证与额外可靠性试验。
六、选型与注意事项
选型时关注波长与光强的批次偏差（binning），以及在高温、低驱动电流下的亮度变化。为保证长期稳定，建议在 PCB 设计中保留热散空间、采用合适的电流限制和 ESD 保护，并在样件上做实际亮度与寿命验证。
总结：MHT150CGCT 以高可见性的黄绿色光、宽视角与标准 1206 封装，为通用指示和面板应用提供稳定可靠的光源选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
