Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
MEIHUA MHT150UBCT
Configuration
1 options
Configuration
24+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- MEIHUA MHT150UBCT
- Type
- MEIHUA
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 95mW
- Electronic Component
- Electronic Component
- Electronic Component
- MEIHUA
- Electronic Component
- MHT150UBCT
- Electronic Component
- 1
- Package
- 1206
- Electronic Component
- 460nm~475nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.027g
- Electronic Component
- 1
- LED
- 285mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0226603422
- Electronic Component
- 468nm
- Operating Temperature
- 40℃~+85℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MHT150UBCT 产品概述
一、产品简介
MHT150UBCT 为美华（MEIHUA）品牌 1206 封装的蓝色发光二极管（LED），采用无色透明透镜设计，发出清晰的蓝光。器件设计用于面板指示、状态提示和一般照明点光源等场合，兼顾可视亮度与视角覆盖，适合表面贴装自动化生产。
二、主要技术参数
- 发光颜色：蓝色（峰值波长 468 nm）
- 波长范围：460 nm ~ 475 nm
- 正向电流（If）：20 mA（额定）
- 正向压降（Vf）：3.655 V（在额定电流下典型值）
- 光强度：285 mcd（在 20 mA 条件下典型）
- 发光角度：130°
- 最大耗散功率：95 mW（器件热功耗额定）
- 工作温度：-40 ℃ ~ +85 ℃
- 封装：1206 SMD，无色透明透镜
三、光学与电气特性说明
在推荐的工作点（If = 20 mA）下，典型电耗约为 3.655 V × 20 mA ≈ 73 mW，低于器件最大耗散功率 95 mW，但仍建议考虑热路径设计以保证长期可靠性；光强 285 mcd 提供良好的可视性，130° 的发光角满足宽视角指示需求。峰值波长 468 nm 居于典型蓝光区，色温和视觉效果适合状态指示与显示提示。
四、封装与安装注意
MHT150UBCT 为 1206 表面贴装封装，适合常规 SMT 回流焊流程。为保证焊接可靠性与光学性能：
- 建议按 PCB 厂商或器件数据手册推荐焊盘布局；
- 回流焊时避免超出器件耐热极限并控制焊接曲线的升降速率；
- 焊接后应避免剧烈热循环和机械应力。
五、应用场景
适用于电子设备指示灯、家用电器面板、通信设备状态显示、仪表仪器、消费电子及其他需要蓝色指示的场合。1206 尺寸兼顾安装密度与散热，有利于自动贴装生产。
六、可靠性与储存建议
- 器件对静电敏感，操作与包装拆封时应采取 ESD 预防措施；
- 建议按干燥箱或原厂密封盘储存，开封后如未立即使用应遵守防潮回流焊要求（参考元件湿敏等级）；
- 长期工作时应考虑热阻与 PCB 散热，避免长期在高温高电流条件下运行。
七、选型提示与配套建议
在设计前确认工作电流、期望亮度与色容差；若需要更高亮度或更宽温度范围，可考虑更大封装或高功率 LED；如用于颜色匹配的场合，建议取得完整的光谱和色坐标数据以便校准。需要具体封装尺寸、回流曲线或可靠性数据，请参照厂方完整数据手册或联系美华技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
