Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Mingda Micro MD7030
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- MD7030
- Type
- Mingda Micro
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- MD7030
- Electronic Component
- 1
- Package
- SOT-89-3
- Electronic Component
- Supervisorand positions IC
- Electronic Component
- 0.084g
- Electronic Component
- 1
- Electronic Component
- BM0264548264
- Operating Temperature
- 40℃~+85℃@(TA)
- Operating Voltage
- 1.5V~15V
- ICType
- Voltage Detector
- Output Type
- Electronic Component
- Voltage
- 3V
- Static Current(Iq)
- 1.2uA
- Supervisor Voltage
- 1
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MD7030 产品概述
一、产品简介
MD7030 是明达微推出的一款低功耗电压检测器，采用 SOT-89-3 封装，监测点数为 1 路。器件在 VCC 低于阈值时输出低电平复位信号（低电平有效），输出为高耐压 NMOS 开漏结构，适配多种电源域与上拉电平。工作电压范围宽，适用电源从 1.5V 到 15V，典型阈值电压为 3.00V，静态电流仅 1.2µA（IQ），适合电池供电与低功耗系统。
二、主要特性
- 芯片类型：电压检测器（电压监控/复位发生器）
- 输出类型：NMOS 高耐压开漏（open-drain）
- 工作电压范围：1.5V ～ 15V
- 复位有效电平：低电平有效（当 VCC < VTH 输出拉低）
- 阈值电压：3.0V（规格点）
- 监控路数：1 路
- 工作温度：-40°C ～ +85°C（TA）
- 静态电流：1.2µA（极低静态功耗）
- 封装形式：SOT-89-3
三、功能说明
当待监测电压低于 3.0V 门限时，MD7030 将把开漏输出拉低，产生复位或故障指示；当电压恢复超过阈值时，输出释放（由外部上拉电阻拉高），从而结束复位。高耐压 NMOS 输出可在较宽的总线电压条件下与不同电平的外部电路直接配合，便于系统电源管理与电平兼容。
四、典型应用
- 电池供电设备（便携式终端、遥控器、可穿戴）
- 物联网节点与低功耗传感器模块
- MCU 复位与电源监控
- 电源管理与电压序列控制
- 消费电子与工业控制的电源故障检测
五、封装与使用建议
MD7030 提供 SOT-89-3 封装，便于贴片组装与散热管理。典型使用中，开漏输出需配合合适的上拉电阻（推荐值视上拉电压与响应速度而定，常用 10kΩ～100kΩ 范围），电源输入应并联去耦电容以减少瞬态误触发。布局时建议将器件靠近被监测电源引脚放置，缩短监测线路以提高抗干扰性。
MD7030 以其超低静态电流与宽电压适应性，为对功耗和可靠性有严格要求的电源监控场景提供稳健的解决方案。品牌：明达微。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
