Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PCA9541APW/01,118 PCA9541APW
Configuration
1 options
Configuration
24+
Available for RFQ
Technical data
Product details
17
specifications
Core information
- Product name
- NXP PCA9541APW / 01, 118
- Type
- NXP
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- NXP
- Electronic Component
- PCA9541APW/01,118
- Electronic Component
- 1
- Package
- TSSOP-16
- Electronic Component
- Other Interface
- Electronic Component
- 0.276g
- Electronic Component
- 1
- Features
- positions
- Electronic Component
- BM0257165785
- Operating Voltage
- 2.3V~5.5V
- Interface Type
- I2C；SMBus
- Electronic Component
- Electronic Component
- Electronic Component
- 2500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PCA9541APW/01,118 产品概述
一、简介
PCA9541APW/01,118 是恩智浦（NXP）推出的一款双通道 I²C/SMBus 多路复用器，封装为表面贴装 TSSOP-16。器件工作电压范围为 2.3 V 至 5.5 V，适配多种电源平台。其主要用途是在一条上游 I²C 总线与两条独立下游总线之间进行可控切换，从而实现多设备隔离与地址冲突管理。
二、主要功能与特性
- 两路下游通道，可选择性连接任意一路或同时断开，便于管理具有相同从地址的从设备。
- 与 I²C、SMBus 协议兼容，保留总线的开放漏极特性（需要外部上拉电阻）。
- 宽工作电压：2.3 V ~ 5.5 V，方便在低压与经典 3.3 V/5 V 平台中使用。
- TSSOP-16 小封装，便于表面贴装 PCB 布局与批量组装。
- 低引脚占用，适合空间受限的嵌入式系统与测试台设计。
三、典型应用场景
- 解决 I²C 从设备地址冲突：多个相同地址的传感器或 EEPROM 可通过多路复用器轮流接入总线。
- 片上系统或模块化设计中，上游主控与多个功能子板之间的总线隔离。
- 工业或测试环境下的自动化切换与多通道数据采集。
- 需要将单个主机与多组 I²C 设备分时通信的场景，例如固件下载、器件调试与生产测试。
四、设计与使用建议
- 上拉电阻：I²C 总线需要外加上拉电阻。各下游通道可单独上拉，以控制每路的总线速率与负载。上拉阻值需根据总线电容与目标速率选择。
- 电源与地：器件与所有下游设备应有公共地参考；避免将多路复用器与下游设备置于不同电源域而未做电平匹配，器件本身不做电平转换。
- 布局：将上拉电阻与多路复用器尽量靠近器件和下游连接处放置，缩短 SDA/SCL 路径，降低寄生电容与串扰。
- 去耦与滤波：在 VCC 引脚放置适当的去耦电容（如 0.1 μF）以抑制瞬态噪声。必要时在总线端增加 RC 滤波或串联电阻改善信号完整性。
- 多器件级联：若在同一系统中使用多个多路复用器，注意为每个器件分配不同的 I²C 地址或通过硬件选址引脚区分，详细请参照原厂资料。
五、注意事项与资料参考
- 器件通过 I²C 命令进行通道选择与控制，具体寄存器映射、时序与最大速率等应参照 NXP 官方数据手册获取精确参数。
- PCA9541 并非电平转换器，当上下游电源电压差异较大时需额外设计电平转换方案。
- 在高速或长总线应用中，应关注总线电容限制及上拉阻值匹配，避免信号下降时间过长导致通信错误。
- 建议在工程样机阶段进行总线完整性与热稳定性测试，以验证在目标系统条件下的可靠性。
如需进一步的电气参数、引脚说明或寄存器操作范例，请提供是否需要我帮您检索并解读 NXP 官方数据手册中的具体条目。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
