Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
6TPE330MFL
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PANASONIC 6TPE330MFL
- Type
- PANASONIC
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PANASONIC
- Electronic Component
- 6TPE330MFL
- Electronic Component
- 1
- Electronic Component
- 330uF
- Package
- SMD,7.3x4.3mm
- Electronic Component
- Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.338g
- Electronic Component
- 1
- Electronic Component
- BM0264574012
- Operating Temperature
- 55℃~+105℃
- Voltage
- 6.3V
- Electronic Component
- Electronic Component
- Electronic Component
- 2500
- Resistor(ESR)
- 15mΩ@100kHz
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
6TPE330MFL — PANASONIC（松下）钽电容产品概述
一、产品概述
6TPE330MFL 是松下出品的一款固体钽（tantalum）电容，额定容量为 330µF，标称精度 ±20%，额定电压 6.3V，等效串联电阻（ESR）为 15mΩ@100kHz，工作温度范围为 -55℃ 至 +105℃。器件为表面贴装（SMD）封装，外形尺寸 7.3 × 4.3 mm，适合对体积与低阻抗有要求的低电压电源滤波与去耦场合。
二、关键参数
- 容值：330µF ±20%
- 额定电压：6.3V
- ESR：15mΩ（100kHz）
- 工作温度：-55℃ ~ +105℃
- 封装：SMD，尺寸 7.3×4.3 mm
- 型号：6TPE330MFL（PANASONIC）
三、主要特性与优势
- 高容值/体积比：在有限封装空间内提供较大电容值，适合低压供电平滑。
- 低ESR：15mΩ 的低等效串联电阻有利于在高频下保持良好滤波和低纹波性能。
- 宽温度范围：支持工业级温度，适合各种苛刻环境使用。
- SMD 封装：适配自动贴片生产与高密度电路板设计。
四、典型应用场景
- 低压开关电源输出滤波与去耦
- 各类嵌入式系统与通信设备的电源稳压环节
- 消费类与工业电子中需要大容量低ESR的去耦场合
- 音频电源滤波以及瞬态响应要求较高的电路
五、使用注意事项与设计建议
- 极性器件：钽电容为极性元件，请严格按电路极性安装，避免反向电压。
- 耐冲击电流：钽电容对浪涌/冲击电流敏感，设计时应控制充放电电流及采用限流/软启动措施。
- 降额建议：为获得更高可靠性，实际设计中可考虑对额定电压适当降额使用。
- 回流焊与存储：遵循厂商的回流焊温度曲线和防潮储存规范，避免焊接与湿度引起的故障。
六、封装与生产适配
- 封装尺寸 7.3×4.3 mm，适合自动贴片生产线和回流焊工艺。
- 建议在布局时预留足够焊盘面积与散热通道，并注意与其它热源的间隔以保证长期可靠性。
总结：6TPE330MFL 为一款面向低压电源滤波与高密度板级设计的高容值低ESR钽电容，适合在要求体积小、纹波小和温度范围宽的场合使用。购买与设计前建议参考松下官方数据手册以获取完整的温升、浪涌电流、回流焊曲线与可靠性数据。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
