Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TX2SA-24V-Z TX2SA
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- PANASONIC TX2SA-24V-Z
- Type
- PANASONIC
- Unit
- Electronic Component
- Minimum package
- 500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- PANASONIC
- Electronic Component
- TX2SA-24V-Z
- Electronic Component
- 1
- Package
- SMD,15x7.4mm
- Electronic Component
- Signal Relay
- Electronic Component
- 3.014g
- Electronic Component
- 1
- Electronic Component
- 4ms
- Electronic Component
- BM0265110395
- Operating Temperature
- 40℃~+85℃
- Contact Resistor
- 100mΩ
- Coil Voltage
- 24V
- Coil Resistor
- 4.114kΩ
- Electronic Component
- Conversion: 2C
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
松下TX2SA-24V-Z继电器产品概述
一、核心身份与品牌定位
松下TX2SA-24V-Z是一款专为电信级与工业控制场景设计的低压直流继电器，隶属于松下继电器产品线。依托松下百年电子元器件制造经验，该产品主打「高可靠性、低功耗、宽温适应性」，是电信交换、数据通信、小型工业控制等领域的理想执行部件。
二、关键电气参数总览
核心参数清晰适配低压直流系统需求，关键指标如下：
类别 具体参数 线圈特性 24V DC驱动，额定功率140mW，电阻4.114kΩ 触点形式 双刀双掷转换（2C/DPDT），2组独立触点 触点能力 2A@30VDC（电阻负载），最大切换电压220V DC 响应速度 动作时间4ms，释放时间4ms 接触可靠性 接触电阻≤100mΩ 环境范围 工作温度-40℃~+85℃（工业级宽温）三、触点系统与切换优势
触点是继电器的核心执行单元，TX2SA-24V-Z采用银+镀金复合触点，兼具性能与寿命优势：
- 低损耗信号传输：银材质保证接触电阻≤100mΩ，减少模拟/数字信号的传输衰减，适配电信线路切换需求；
- 抗腐蚀长寿命：镀金层有效抑制触点氧化，避免长期运行中出现接触不良，适合7×24小时连续工作场景；
- 灵活DPDT逻辑：双刀双掷形式可同时控制两路独立信号/负载，支持「常闭→常开」双向转换，适配复杂控制场景（如冗余切换、多路路由）。
四、线圈与功耗特性
线圈性能直接影响系统能耗与响应速度，该产品具备明显优势：
- 低功耗适配：额定功率仅140mW，驱动电流约5.8mA（24V/4.114kΩ），可降低嵌入式设备、电池供电系统的能耗；
- 快速响应：动作/释放时间均为4ms，满足实时切换需求（如信号路由、控制逻辑切换）；
- 通用驱动：24V DC是工业与电信领域的常用电压，无需额外升压/降压电路，适配性强。
五、环境适应性与可靠性
针对严苛场景设计，具备工业级可靠性：
- 宽温稳定运行：-40℃~+85℃覆盖寒冷地区基站、高温车间控制设备等场景；
- 抗干扰设计：触点与线圈的隔离设计减少电磁干扰，适合电信设备的信号传输要求；
- 工艺保障：松下成熟的制造工艺，保证参数一致性，降低批量应用中的故障风险。
六、典型应用场景
基于参数特性，该继电器广泛应用于：
- 电信交换：PBX程控交换机、电话线路转接器的信号切换；
- 数据通信：路由器/交换机的端口路由、网络设备冗余切换；
- 小型工业控制：PLC输出模块、小型自动化设备的低压直流控制；
- 安防系统：监控摄像头线路切换、门禁控制逻辑切换；
- 智能家居：智能网关信号路由、小型家电控制模块。
总结：松下TX2SA-24V-Z继电器以「低功耗、高可靠、宽温适配」为核心优势，精准匹配电信与工业控制场景的需求，是替代传统继电器的高性价比选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
