Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PANJIT GDZ5.6B_AX_10001
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PANJIT GDZ5.6B_AX_10001
- Type
- PANJIT
- Minimum package
- 5000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PANJIT
- Electronic Component
- GDZ5.6B_AX_10001
- Electronic Component
- 1
- Package
- DO-34/T-26
- Electronic Component
- Zener Diode
- Electronic Component
- 0.086g
- Electronic Component
- 1
- (Zzt)
- 13Ω
- Electronic Component
- BM0264544579
- Diode
- 1
- Current(Ir)
- [email protected]
- Power Dissipation(Pd)
- 500mW
- Electronic Component
- 5.45V~5.73V
- Electronic Component
- Electronic Component
- Electronic Component
- 5000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
GDZ5.6B_AX_10001 产品概述
一、产品简介
GDZ5.6B_AX_10001 是强茂（PANJIT）出品的一款独立式稳压二极管，典型稳压值 5.6V，采用 DO-34/T-26 轴向玻璃封装。作为小功率肖特基/齐纳类稳压元件，它在低成本、体积小和安装简便的场合中常用于基准电压、波形钳位与浪涌抑制等应用。
二、主要参数
- 稳压值（标称）：5.6V；规定范围：5.45V ~ 5.73V
- 反向电流 Ir：5 μA @ 2.5V（在规定测试点测得的反向漏电）
- 耗散功率 Pd：500 mW（封装极限）
- 稳压阻抗 Zzt：13 Ω（在规定测试电流和频率下测得）
- 封装：DO-34 / T-26（轴向玻璃）
三、典型应用
- 低功耗参考电压源与基准电路
- 过压或尖峰钳位（配合串联限流元件）
- 简易稳压模块与检测电路
- 信号钳位、脉冲整形与保护电路
四、使用建议与散热
- 最大允许稳态电流（理论值） Iz_max ≈ Pd / Vz = 0.5W / 5.6V ≈ 89 mA，但轴向玻璃封装的散热受限，建议设计电流不超过 50 mA 以保证可靠性与寿命。
- 典型限流计算示例：当电源为 12V，期望流过二极管 Iz = 20 mA 时，串联电阻 R = (12V−5.6V) / 0.02 A = 320 Ω；二极管耗散功率 Pd = 5.6V × 0.02 A = 0.112 W。
- 注意热阻与环境温度，尽量避免将器件长期工作在最大 Pd 附近，必要时增加散热或改用更大功率封装器件。
五、封装与可靠性
DO-34 轴向玻璃封装适合穿孔安装与手工焊接，机械强度与耐热性满足一般电子装配。封装体积小但热阻较大，长期高功耗工作可能导致参数漂移，应在实际设计中留有余量，并注意焊接温度与加热时间，避免过热损伤。
六、选型注意事项
- 若电路要求高精度稳压或低噪声，应选择低阻抗或更高功率等级的稳压二极管；
- 关注测试条件：Zzt、Ir 等参数与测试电流、温度相关，设计时应参考完整的器件规格书；
- 实际应用时考虑温漂与温度依赖的漏电增长，对精密电路做温度补偿或采用更稳定的参考源。
总结：GDZ5.6B_AX_10001 适合用于一般电子设备中对 5.6V 基准或保护需求的场合，优点为成本低、封装小、易安装；在设计中应合理限流并注意散热与长期可靠性。若需完整规格表或测试曲线，可参考 PANJIT 官方数据手册以获得详细试验条件与电气特性。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
