Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PANJIT MMSZ5236A_R1_00001
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PANJIT MMSZ5236A_R1_00001
- Type
- PANJIT
- Minimum package
- 3000 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PANJIT
- Electronic Component
- MMSZ5236A_R1_00001
- Electronic Component
- 1
- Package
- SOD-123
- Electronic Component
- Zener Diode
- Electronic Component
- 0.03g
- Electronic Component
- 1
- (Zzk)
- 500Ω
- (Zzt)
- 6Ω
- Electronic Component
- BM0261487521
- Diode
- 1
- Current(Ir)
- 3uA@6V
- Power Dissipation(Pd)
- 500mW
- Electronic Component
- 7.35V~7.65V
- Electronic Component
- 50℃~+150℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MMSZ5236A_R1_00001 产品概述
1. 产品简介
MMSZ5236A_R1_00001 是一款由 PANJIT（强茂）公司生产的稳压二极管，采用独立式配置，封装形式为 SOD-123。该稳压二极管的主要功能是提供稳定的电压输出，广泛应用于各种电子电路中，特别是在需要精确电压调节的场合。
2. 主要参数
功率 (Pd): 500mW
- 该参数表示二极管能够承受的最大功率损耗，确保在正常工作条件下不会因过热而损坏。
反向电流 (Ir): 3μA @ 6V
- 反向电流是指在反向电压下流过二极管的微小电流，该值越小，说明二极管的绝缘性能越好。
稳压值 (标称值): 7.5V
- 这是稳压二极管在正常工作条件下的标称输出电压，适用于需要7.5V稳压的电路。
稳压值 (范围): 7.35V ~ 7.65V
- 该范围表示稳压二极管在实际应用中可能输出的电压波动范围，确保输出电压在可接受的误差范围内。
阻抗 (Zzt): 6Ω
- 阻抗是指在特定工作条件下二极管的动态电阻，较低的阻抗有助于提高电路的响应速度和稳定性。
3. 产品特点
高精度稳压: MMSZ5236A_R1_00001 提供7.5V的稳压输出，且稳压范围在7.35V至7.65V之间，确保输出电压的稳定性和精确性。
低反向电流: 反向电流仅为3μA @ 6V，表明该二极管在反向偏置时具有极低的漏电流，有助于提高电路的效率和可靠性。
小封装: 采用SOD-123封装，体积小巧，适合高密度PCB布局，特别适用于空间受限的便携式电子设备。
高功率承受能力: 最大功率损耗为500mW，能够承受较高的功率负载，适用于多种应用场景。
4. 应用领域
MMSZ5236A_R1_00001 稳压二极管广泛应用于以下领域：
- 电源管理: 用于稳压电源模块，确保输出电压的稳定性。
- 通信设备: 在通信设备的电源电路中提供稳定的电压，保证设备的正常运行。
- 消费电子: 适用于各种消费电子产品，如手机、平板电脑、数码相机等，提供精确的电压调节。
- 工业控制: 在工业控制系统中，用于稳压和保护电路，提高系统的可靠性和稳定性。
5. 使用注意事项
工作温度: 在使用过程中，应注意二极管的工作温度范围，避免超过其最大允许温度，以防止性能下降或损坏。
反向电压: 虽然该二极管具有较低的反向电流，但仍需注意避免施加过高的反向电压，以免造成击穿。
焊接条件: 在焊接过程中，应遵循推荐的焊接温度和时间，避免因过热而损坏二极管。
6. 总结
MMSZ5236A_R1_00001 是一款高性能的稳压二极管，具有高精度稳压、低反向电流和小封装等特点，适用于多种电子电路中的电压调节和保护。其可靠的性能和广泛的应用领域使其成为电子设计工程师的理想选择。通过合理的使用和维护，该二极管能够为电子设备提供稳定、可靠的电压输出，确保系统的正常运行。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
