Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PCAQ7060MW-302 PCAQ7060MW
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PCAQ7060MW-302
- Type
- PROD
- Minimum package
- 1500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PCAQ7060MW-302
- Electronic Component
- 1
- Package
- SMD-4P,7x6mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 0.732g
- Voltage
- 125V
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0229259040
- Operating Temperature
- 25℃~+125℃
- Resistor
- 10MΩ
- Voltage
- 125V
- Current
- 900mA
- @Frequency
- 3kΩ@100MHz
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PCAQ7060MW-302 产品概述
一、产品简介
PCAQ7060MW-302 为谱罗德（PROD）出品的双通道共模滤波器（Common Mode Choke），适用于需要抑制共模干扰与 EMI 的直流与交流电路。器件采用 SMD-4P 封装，封装尺寸 7×6 mm，体积小巧，便于高密度线路板设计与自动化贴装。
二、主要电气参数
- 通道数：2（双通道）
- 额定电流：900 mA（连续）
- 直流电阻（DCR）：75 mΩ（typ）
- 共模阻抗：3 kΩ @ 100 MHz
- 额定电压 / 耐电压：125 V（DC/AC 均标注为125 V）
- 绝缘电阻：10 MΩ
- 工作温度范围：-25 ℃ 至 +125 ℃
三、性能特点
- 高共模抑制：在 100 MHz 时共模阻抗达 3 kΩ，有效抑制高频干扰，有利于满足 EMI/EMC 要求。
- 低直流电阻：75 mΩ 的低 DCR 降低功率损耗与发热，适合中低电流应用场景。
- 宽温度适应：-25 ℃ 至 +125 ℃ 的工作温度范围，适用于消费电子、电源与工业控制等环境。
- 表面贴装封装：SMD-4P、7×6 mm，便于自动化生产与小型化设计。
四、典型应用场景
- 移动设备与便携电源：为 USB 或供电线缆提供共模干扰抑制。
- 开关电源与电源模块：减少开关噪声对外部系统的影响。
- 工业控制与通信设备：提升信号完整性与抗干扰能力，满足 EMI 合规性。
- 汽车电子（非高温端/需确认规格）：在符合温度与电气要求的分系统中用于滤波。
五、建议与注意事项
- 请根据实际工作电流留有适当裕量，长期工作接近额定电流可能导致升温与寿命变化。
- 在高频 EMC 设计中，合理配合差模滤波与旁路电容，以达到最佳滤波效果。
- 焊接及回流温度应遵循生产工艺规范，避免超过器件允许的热应力范围。
- 若用于汽车或更苛刻的工业环境，建议确认具体应用的认证与额外可靠性测试。
六、采购与封装信息
- 品牌：PROD（谱罗德）
- 型号：PCAQ7060MW-302
- 封装：SMD-4P，7×6 mm
- 在选型与批量采购前，建议索取完整规格书（Datasheet）与可靠性测试报告，以确保满足系统级需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
