Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PSCLAQ0905-501Y PSCLAQ0905
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PSCLAQ0905-501Y
- Type
- PROD
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PSCLAQ0905-501Y
- Electronic Component
- 1
- Package
- SMD-4P,9.2x6mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 0.808g
- Voltage
- 80V
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0228697070
- Operating Temperature
- 25℃~+105℃
- Voltage
- 80V
- Current
- 1A
- Inductor@Frequency
- 500uH@100kHz
- @Frequency
- 1kΩ@100kHz
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PSCLAQ0905-501Y 产品概述
一、产品简介
PSCLAQ0905-501Y 是谱罗德（PROD）推出的一款 SMD 共模滤波器，采用四端贴片封装（SMD-4P），外形尺寸 9.2 × 6 mm。该器件在 100 kHz 时表现出高共模电感和阻抗，专为开关电源、DC-DC 变换器、LED 驱动、电池管理与工业控制等对开关噪声抑制有要求的低压电源线路而设计。
二、主要电气参数
- 通道数：2（共模双线）
- 共模电感：500 µH @ 100 kHz
- 阻抗：1 kΩ @ 100 kHz
- 额定电流：1 A（连续）
- 直流电阻（DCR）：150 mΩ
- 额定电压 / 耐电压：80 V（DC/AC）
- 工作温度范围：-25 ℃ ~ +105 ℃
三、产品特点与优势
- 高共模抑制：在 100 kHz 附近具有 500 µH 的共模电感和 1 kΩ 阻抗，有效降低开关噪声与共模干扰。
- 紧凑封装：9.2 × 6 mm 的 SMD-4P 封装，便于高密度 PCB 布局与自动贴装生产。
- 低损耗设计：150 mΩ 的较低直流电阻，有利于减小功耗与发热，适合 1 A 级别电流应用。
- 宽温度范围与可靠性：-25 ℃ 至 +105 ℃，可满足工业环境的可靠性需求。
四、典型应用场景
- 开关电源输入/输出线路的共模噪声抑制
- DC-DC 变换器与电源模块的 EMI 滤波
- LED 驱动电源及照明控制器
- 工业控制、通讯设备及电池管理系统的电磁兼容设计
五、设计与使用建议
- 在开关器件或输入端靠近电源入口处布局，可获得最佳滤波效果。
- 考虑直流偏置对感值的影响，长期工作电流接近额定值时建议留有余量以避免感值下降。
- 与合适的旁路/差模电容搭配，可在宽频带内实现更好的 EMI 抑制。
- 采用标准回流焊工艺，注意焊接温度与时间以保证元件长期可靠性。
产品型号：PSCLAQ0905-501Y，品牌：PROD（谱罗德）。如需更详细的焊接曲线、瞬态耐受能力或定制参数，请提供具体应用场景以便进一步选型与验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
