Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDMCAT16128-202ML PDMCAT16128
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDMCAT16128-202ML
- Type
- PROD
- Minimum package
- 96 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDMCAT16128-202ML
- Electronic Component
- 1
- Package
- Through-hole, 20x18mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 8.59g
- Voltage
- 600V
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0228697071
- Operating Temperature
- 40℃~+105℃
- Voltage
- 600V
- Current
- 6A
- Inductor@Frequency
- 2mH@1kHz
- Voltage(AC)
- 600V
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDMCAT16128-202ML 产品概述
PDMCAT16128-202ML 为谱罗德（PROD）出品的一款双通道共模滤波器，采用插件封装（尺寸约20×18 mm），面向中高压开关电源、逆变器及工业电磁兼容（EMC）抑制场合。器件在1 kHz 时呈现 2 mH 的共模电感量，兼顾大电流承载与高压耐受能力，适合对共模干扰有严格要求的系统。
一、主要参数
- 通道数：2
- 共模电感：2 mH @ 1 kHz
- 额定电流：6 A
- 额定电压：600 V（DC/AC 注明）
- 耐电压：600 V AC，持续 3 秒
- 直流电阻（DCR）：32 mΩ
- 工作温度范围：-25 ℃ ～ +85 ℃
- 封装形式：插件（Through-hole），尺寸约 20 × 18 mm
- 品牌/型号：PROD（谱罗德） / PDMCAT16128-202ML
二、产品特点
- 强力抑制共模干扰：2 mH 的高共模电感，在低中频段对共模噪声具有良好衰减效果。
- 大电流能力：6 A 连续电流，适合中小功率电源和驱动应用。
- 高压耐受：600 V 额定与 600 V AC 耐压性能，使其可应用于高电压侧滤波场景。
- 低 DCR：仅 32 mΩ，降低功率损耗和发热，利于系统效率优化。
- 插件封装便于手工焊接和维修更换，适合快速样机验证与批量生产安装。
三、典型应用
- 开关电源输入滤波（AC/DC、DC/DC）
- 逆变器与电机驱动的共模噪声抑制
- 工业控制设备与家电的 EMI 滤波段
- 太阳能逆变器、高压电源模块的共模滤波
四、安装与使用建议
- 焊接：建议按常规插件元件工艺回流或波峰焊，注意避免超温和长时间加热以保护绕组绝缘。
- 布局：输入侧靠近干扰源放置，尽量缩短与器件的连接线，避免形成大环路。
- 散热：在高电流或高温环境应用中，考虑器件周边散热设计，必要时降低载流或加装散热元件。
- 安全：本型号耐电压能力为 600 V AC（3 s），但不等同于安全类绝缘元件认证，设计时应依据系统要求选型并满足相应安全标准。
如需样品参数曲线（频率-电感/阻抗曲线）、布板封装图或可靠性测试报告，可提供进一步技术资料和支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
