Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDMTAT068125-101MLU PDMTAT068125
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDMTAT068125-101MLU
- Type
- PROD
- Minimum package
- 100 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDMTAT068125-101MLU
- Electronic Component
- 1
- Package
- Through-hole, 23x12mm
- Type
- Inductor
- Electronic Component
- Color Ring / Through-hole Inductor
- Electronic Component
- ±20%
- Electronic Component
- 0.9mm
- Electronic Component
- 11.165g
- Inductor
- 100uH
- Electronic Component
- 1
- Electronic Component
- BM0228679685
- Current
- 8A
- Resistor(DCR)
- 26mΩ
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDMTAT068125-101MLU 产品概述
一、产品简介
PDMTAT068125-101MLU 是谱罗德（PROD）出品的一款环型插件电感，规格为 100 µH，公差 ±20%，额定直流电流 8 A，直流电阻（DCR）为 26 mΩ。封装为插件式，外形尺寸约 23×12 mm，线径 0.9 mm，属于色环/插件电感家族，适用于中高电流、要求较低 DCR 的电源滤波与储能场合。
二、主要技术参数
- 电感值：100 µH，公差 ±20%
- 额定电流：8 A（长期使用请按实际工作温升与饱和特性做余量）
- 直流电阻（DCR）：26 mΩ
- 类型：环型（环形磁芯）插件电感 / 色环标识
- 线径：0.9 mm（导线直径）
- 外形尺寸：约 23 × 12 mm（插件式封装）
- 品牌：PROD（谱罗德）
- 型号：PDMTAT068125-101MLU
三、主要特性与优点
- 低 DCR：26 mΩ 的直流电阻有利于降低功耗与发热，提高效率，尤其适合需要大电流通过的电源回路。
- 中高电流能力：8 A 额定电流可满足多数降压转换器、LED 驱动、电机驱动前端滤波等场合的要求。
- 插件封装：便于手工焊接与维修，适用于快速样机验证和小批量生产。
- 紧凑体积：23×12 mm 的体型在有限空间内提供较高感量，适合板端或面向机箱内的电源模块布局。
- 稳定可靠：环型结构在磁通闭合方面表现良好，抗外界磁干扰能力较强，适合 EMI/电源滤波应用。
四、典型应用
- 开关电源（DC-DC 降压/升压）输出滤波与储能
- LED 驱动电源前端滤波
- 工业控制和通信设备中的电源抑制与滤波
- 电池管理与充电系统（需综合考虑饱和与温升）
- 各类电源模块、逆变器与电机驱动辅助滤波
五、安装与使用建议
- 焊接：推荐遵循通用插件元件焊接工艺，避免长时间高温加热（建议参考厂家焊接曲线），以免影响绝缘与结构。
- 布局：尽量使电感与开关器件、输入输出电容布局紧凑，减小回路面积以降低 EMI。为散热考虑，周边留有适当通风空间。
- 机械固定：插件件受振动环境下建议配合点胶或机械卡位固定，以防松动或引脚疲劳。
- 环境：避免长期潮湿、高温环境存放，元件在极端温度下性能可能下降。
六、选型与注意事项
- 饱和电流与纹波电流：额定电流 8 A 为持续允许值，实际使用时需关注电感的纹波电流、峰值电流与磁芯饱和特性，必要时对额定值做适当裕量。
- 温升评估：在实际电路中测量温升，确认工作温度不超过元件及系统允许范围。
- 测试验证：选型后建议通过实际电路测试电感值、DCR、温升及电磁干扰情况，确保满足系统需求。
- 备货与替代：如需替代器件，应匹配电感值、DCR、额定电流、封装尺寸和饱和特性，优先选择同等级或性能更好的型号。
如需该型号的详细规格书（含温升曲线、频率特性、饱和电流测试等）或样片、报价与可用性信息，可联系供应商或谱罗德授权经销渠道获取更详尽资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
