Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDSQAT2418-203MLB PDSQAT2418
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDSQAT2418-203MLB
- Type
- PROD
- Minimum package
- 72 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDSQAT2418-203MLB
- Electronic Component
- 1
- Package
- Through-hole, 24x31.5mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 23.47g
- Voltage
- 1kV
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0257647804
- Operating Temperature
- 40℃~+105℃
- Resistor
- 100MΩ
- Current
- 4.5A
- Inductor@Frequency
- 20mH@1kHz
- Resistor(DCR)
- 60mΩ
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDSQAT2418-203MLB 产品概述
一、主要性能与参数
PDSQAT2418-203MLB 为谱罗德（PROD）出品的插件式共模滤波器（共模扼流圈），双通道设计，标称共模电感 20mH（测试频率 1kHz），直流电阻（DCR）约 60mΩ，额定电流 4.5A。耐电压（隔离耐受）达 1kV，绝缘电阻 ≥100MΩ。工作温度范围 -40℃ 至 +105℃。外形尺寸约 24 × 31.5mm，适用于通过孔（THT）安装。
二、产品特点
- 高共模抑制能力：20mH@1kHz 的较大共模电感，针对低频至中低频区域的共模干扰有良好抑制效果。
- 低功耗与小温升：60mΩ 的较低直流电阻在额定电流下损耗小，有利于降低功耗和器件温升。
- 良好电气隔离：1kV 耐电压与 ≥100MΩ 绝缘电阻，保证信号或电源线路间隔离可靠，适用于需要较高绝缘要求的场合。
- 宽温区适应性：-40℃~+105℃ 的工作温度覆盖工业级应用环境。
- 插件封装：易于手工或波峰焊安装，便于样机验证与批量生产板上牢固固定。
三、典型应用场景
适用于开关电源（SMPS）、交流/直流输入滤波、通信设备、工业控制器、LCD/LED 驱动电源、车载电子（需注意车规认证要求）等场景，用于抑制供电线或信号线的共模干扰，改善电磁兼容（EMC）性能，降低整机辐射与传导噪声。
四、封装与安装建议
- 插件贯穿式安装，建议在 PCB 上预留与封装匹配的孔位并采用牢固焊点保证机械强度；在振动较大环境可配合点胶加固。
- 波峰焊或手工焊接时注意不要长期超温，避免绝缘材料退化；如需回流工艺请与供应商确认适配性。
- 考虑到直流偏置会引起磁芯饱和，实务中建议工作电流在额定电流以下适当留有裕量，以保持标称电感值。
五、可靠性与选型建议
选择时应综合考虑工作电流、连续电流下电感衰减、工作温度与环境湿度及振动强度。若电路中存在较大直流分量或冲击电流，应评估磁芯的直流偏置特性并适当选用额定电流更高的型号。对车规或医疗等高可靠领域，建议向供应商确认相应的认证与试验报告（如温升、耐压、绝缘和寿命测试）。
六、维护与注意事项
长期运行时关注器件温升与外观变化，发现异常发热、开裂或焊点松动应及时更换。布线时尽量保持共模扼流圈与敏感器件有一定间距，避免热源直接辐射影响寿命。
总结：PDSQAT2418-203MLB 提供了较高的共模抑制、良好的电气隔离与宽温度适应性，是中低频共模干扰抑制与电源输入滤波的可靠选择。在设计与选型时应结合实际工作电流、温升和应用环境对器件进行合理余量设计。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
