Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDMCAT18107-103MLB PDMCAT18107
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDMCAT18107-103MLB
- Type
- PROD
- Minimum package
- 152 盒
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDMCAT18107-103MLB
- Electronic Component
- 1
- Package
- Through-hole-4P, 23x15mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 11.3g
- Voltage
- 1.5kV
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0228551946
- Operating Temperature
- 25℃~+105℃
- Voltage
- 1.5kV
- Current
- 4.5A
- Inductor@Frequency
- 10mH@1kHz
- Voltage(AC)
- 1.5kV
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDMCAT18107-103MLB 产品概述
一、产品简介
PDMCAT18107-103MLB 是谱罗德（PROD）出品的一款高压共模滤波器（Common-Mode Choke），为两通道设计（2 通道、4 引脚插件封装）。器件针对高压、高电流环境下的共模干扰抑制而优化，标称电感为 10 mH @ 1 kHz，适用于需要较大共模阻抗的电源与信号入出口滤波场景。
二、主要特性
- 共模电感：10 mH @ 1 kHz（典型值）
- 额定电流：4.5 A（连续工作）
- 耐压/额定电压：1.5 kV（AC），耐电压测试：1.5 kV AC，3 秒
- 直流电阻（DCR）：60 mΩ（典型）
- 工作温度范围：-25 ℃ ~ +105 ℃
- 封装形式：插件（Through-hole），4P，外形尺寸约 23 × 15 mm
- 品牌：PROD（谱罗德）
三、产品优势
- 高共模电感量（10 mH），在低频至中频段具有良好抑制能力，能有效降低共模噪声和电磁辐射。
- 较低的 DCR（60 mΩ），能在保证滤波性能的同时减少额外的功率损耗与发热。
- 4.5 A 的额定电流适合中等功率电源环节使用。
- 1.5 kV 的耐压能力，满足高电压隔离和抗击穿要求，适用于部分工业与高压应用场合。
四、典型应用
- 开关电源（SMPS）输入/输出的EMI抑制
- 工业控制设备、变频器的共模干扰滤波
- 高压电源、仪器仪表的输入保护与干扰抑制
- 通信与测控系统中对地电位差引起的共模干扰抑制
五、机械与封装信息
- 封装类型：插件式 4P，利于穿板焊接与后续维修更换
- 外形尺寸：23 × 15 mm（典型），便于在受限空间内布局
- 引脚排列与尺寸请参考厂家详细机械图纸，以保证装配与绝缘间隙要求
六、使用与安装注意事项
- 在高温环境下建议按系统热设计适当降额使用，持续运行时注意散热与周围元件温升。
- 焊接时遵循厂商的回流/波峰焊或手工焊接温度曲线，避免过热造成绝缘材料退化。
- 安装位置应保证与高压导体或敏感信号线保持足够间距；若有外部封装或盖板，需考虑绝缘与爬电距离。
- 在强电磁场或高冲击环境中使用，建议进行系统级验证以确认滤波效果与可靠性。
七、测试与认证
- 单体耐压测试：1.5 kV AC，持续 3 秒（出厂或按客户要求检验）
- 建议在设计阶段进行温升、寿命及系统级 EMI 测试，确保在目标应用下满足规范要求。
八、包装与订购信息
- 型号：PDMCAT18107-103MLB
- 品牌：PROD（谱罗德）
- 封装：插件-4P，23×15mm
- 订购与大货包装、最低订单量、交期等信息请向谱罗德或授权代理咨询获取准确条款与数据表。
如需进一步的电气图、频率响应曲线、机械图纸或可靠性测试报告，可提供具体需求，我将协助获取或解析相应技术资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
