Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDSQAT1212-103MLB PDSQAT1212
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDSQAT1212-103MLB
- Type
- THT
- Minimum package
- 154 托盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDSQAT1212-103MLB
- Electronic Component
- 1
- Package
- Through-hole
- Electronic Component
- Common Mode Filter
- Electronic Component
- 5.79g
- Voltage
- 1kV
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0229259037
- Operating Temperature
- 40℃~+105℃
- Resistor
- 100MΩ
- Current
- 2.5A
- Inductor@Frequency
- 10mH@1kHz
- Resistor(DCR)
- 120mΩ
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDSQAT1212-103MLB — PROD(谱罗德) 共模滤波器产品概述
一、产品简介
PDSQAT1212-103MLB 为 PROD(谱罗德) 推出的插件式共模滤波器，适用于需要抑制共模干扰与提高传导性电磁兼容（EMC）性能的电源与信号链路。该型号在1 kHz 时具有 10 mH 的共模电感量，设计额定电流 2.5 A，兼顾滤波效果与较低的直流损耗，适合工业与消费类电子设备的电磁干扰治理。
二、主要参数
- 通道数：2（双通道共模结构）
- 共模电感：10 mH @ 1 kHz
- 额定电流：2.5 A（连续）
- 直流电阻（DCR）：120 mΩ（典型）
- 耐电压：1 kV（耐压试验等级）
- 绝缘电阻：100 MΩ
- 工作温度范围：-40 ℃ 至 +105 ℃
- 封装形式：插件（Through-hole）
- 品牌：PROD（谱罗德）
注：所有参数以生产检验条件或出厂典型值为准，详细电气特性与曲线请参见生产商数据手册。
三、产品特点
- 高共模电感量：10 mH 在低频段对共模噪声抑制显著，有利于电源输入端与信号线的低频干扰治理。
- 低直流电阻：120 mΩ 降低导通损耗，适合中等电流应用，减小发热与功率损耗。
- 良好绝缘与耐压性能：1 kV 耐压与 100 MΩ 绝缘电阻，满足常见系统间绝缘及耐压测试要求。
- 宽温区适用：-40 ℃~+105 ℃，可在工业级温度环境下稳定工作。
- 插件封装：便于手工或波峰焊装配，适配传统 PCB 工艺与维修场景。
四、典型应用场景
- 开关电源输入端共模抑制（SMPS 输入滤波）
- 工业控制、电机驱动系统的电磁兼容处理
- 通讯设备、电源适配器与消费电子中需抑制共模噪声的场合
- 医疗与测试设备的电源滤波（需结合系统认证与安全要求评估）
五、推荐使用与注意事项
- 确保不超过额定电流 2.5 A，长期工作时建议留有裕量以控制温升。
- 对耐压与绝缘要求较高的系统，请按标准进行耐压（Hi-Pot）与绝缘测试，确认测试电压与被测对象连接方式（绕组间或对外壳）一致。
- 插件安装时避免施加过大机械应力，焊接建议遵循生产商推荐的焊接工艺和回流/波峰参数，避免过长的高温暴露。
- 若工作在高温或高湿环境，应考虑外部散热与环境密封策略，并定期检查电感元件的机械与电气状态。
- 在设计 PCB 时留足绝缘间距与穿孔强度，保证器件引脚与周围元件的热与电气安全。
六、质量与检验
PROD(谱罗德) 对 PDSQAT1212-103MLB 进行出厂电感、DCR、绝缘电阻与耐压测试，产品通过常规出厂检验以保证一致性与可靠性。实际采购时建议向供应商索取完整数据手册、检验报告与批次追溯信息，以便在系统集成时做进一步验证与记录。
如需更多技术参数、封装图或样品支持，请联系生产商或授权代理，获取最新数据手册与应用参考。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
- QFN-80
