Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDMCAT1386-153ML PDMCAT1386
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDMCAT1386-153ML
- Type
- PROD
- Minimum package
- 300 盒
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDMCAT1386-153ML
- Electronic Component
- 1
- Package
- DIP-4P,17x9.6mm
- Electronic Component
- Common Mode Filter
- Electronic Component
- 5.244g
- Voltage
- 1.5kV
- Electronic Component
- 1
- Channel Count
- 2
- Electronic Component
- BM0228180352
- Operating Temperature
- 25℃~+105℃
- Voltage
- 1.5kV
- Current
- 1A
- Inductor@Frequency
- 15mH@1kHz
- Voltage(AC)
- 1.5kV
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDMCAT1386-153ML 产品概述
一、产品简介
PDMCAT1386-153ML 是谱罗德（PROD）推出的一款双通道共模滤波器（Common‑Mode Choke），采用四脚直插封装（DIP‑4P），外形尺寸 17 × 9.6 mm。该器件在 1 kHz 时提供 15 mH 的共模电感，适用于需要高电压耐受、低直流电阻以及中小电流滤波的场合，用于抑制共模干扰、提高系统抗干扰能力。
二、主要参数
- 通道数：2
- 共模电感：15 mH @ 1 kHz
- 额定电流：1 A
- 额定电压（AC）：1.5 kV
- 耐电压：1.5 kV @ AC，3 s
- 直流电阻（DCR）：180 mΩ
- 工作温度范围：-25 ℃ ～ +105 ℃
- 品牌：PROD（谱罗德）
- 封装：DIP‑4P，外形 17 × 9.6 mm
三、产品特性
- 高共模抑制量：15 mH（@1 kHz）在低频段对共模噪声有良好衰减效果，适合电源线与信号线的干扰抑制。
- 良好的耐压性能：1.5 kV AC（3 s）耐压能力，适合对电压隔离有一定要求的设计场合。
- 低直流电阻：180 mΩ 的 DCR 有利于减小通态功耗与发热，适配 1 A 等级的电流承载。
- 耐温范围宽：-25 ~ +105 ℃，可满足一般工业与消费电子环境的温度要求。
- 紧凑封装：DIP‑4P 通过孔封装便于插装与波峰焊接，利于快速工程验证与批量生产。
四、典型应用场景
- 工业控制与测量设备中的输入/输出滤波与浪涌抑制。
- 小功率电源、DC‑DC 模块或通讯设备的共模干扰治理。
- 医疗和测试设备中对通用噪声抑制（在保证符合相应安全规范的前提下）。
- 串口 / 信号线、传感器线路的 EMI 抑制场景（注意电流与电压等级匹配）。
五、安装与注意事项
- 使用时请确保工作电流不超过 1 A，以防磁芯饱和和额外发热。
- 在高电压或高频环境下，应考虑电压应力、爬电距离与系统整体接地，确保实际应用中满足安全标准。
- 器件耐压测试说明为 1.5 kV AC，持续 3 秒，实际应用中应留有余量并遵循相关电气安全规范。
- 焊接与回流建议参考制程规范，避免过高温度或长时间暴露导致性能劣化；如需具体波峰/回流参数，请参阅详细数据手册或联系厂家技术支持。
- 在高温环境或贴近散热源处使用时需关注发热与温升，必要时采取散热措施或降额使用。
六、封装与订购信息
- 型号：PDMCAT1386-153ML
- 品牌：PROD（谱罗德）
- 封装形式：DIP‑4P，体积 17 × 9.6 mm（四脚通过孔安装）
- 订购与技术支持请联系谱罗德授权经销商或访问厂商官网获取完整规格书、引脚图与磁路图，从而确保在具体应用中做到最佳匹配与安全合规。
如需样片测试、详细频率响应曲线、热阻或引脚排布图等资料，可提供进一步支持并转交厂方获取完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
