Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
PROD PDPTAT1012-102K PDPTAT1012
Configuration
1 options
Configuration
26+
Availability on request
Technical data
Product details
19
specifications
Core information
- Product name
- PROD PDPTAT1012-102K
- Type
- PROD
- Minimum package
- 250 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- PROD
- Electronic Component
- PDPTAT1012-102K
- Electronic Component
- 1
- Package
- 10x12mm
- Type
- Inductor
- Electronic Component
- Color Ring / Through-hole Inductor
- Electronic Component
- ±10%
- Electronic Component
- 4.33g
- Inductor
- 1mH
- Electronic Component
- 1
- Electronic Component
- BM0257711550
- Current
- 550mA
- Resistor(DCR)
- 820mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- 250
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
PDPTAT1012-102K 产品概述
一、产品简介
PDPTAT1012-102K 为谱罗德（PROD）推出的一款径向插件工字电感，电感量 1.0 mH，公差 ±10%，适用于低频滤波与电源去耦场合。外形采用色环标识，便于目视识别和手工插件安装，结构稳定，适合批量波峰或回流焊工艺后处理。
二、主要技术参数
- 电感值：1.0 mH ±10%（标称）
- 额定电流：550 mA
- 饱和电流（Isat）：500 mA
- 直流电阻（DCR）：820 mΩ
- 封装形式：径向引线插件（色环标识）
- 外形尺寸：外径约 D13 mm，长度 L15.5 mm，PCB 占位约 10×12 mm
三、性能要点
- 在 500 mA 附近电感开始趋向饱和，若需维持稳定电感值，应尽量让工作电流低于 Isat。
- DCR 820 mΩ 导致的铜损在 0.5 A 时约为 0.20 W，设计时应考虑温升与散热空间。
- ±10% 公差适合一般滤波与能量储存场合，色环标识便于快速选型与维修。
四、典型应用
适用于开关电源输入/输出滤波、直流稳压电源去耦、信号链低频滤波、噪声抑制与电机驱动滤波等需要中小电流处理的应用场景。
五、选型与使用建议
- 若电路对电感稳定性敏感，应优先选用 Isat 高于最大工作电流的型号或考虑预留足够余量（建议 ≥20%）。
- 考虑功耗与温升时，请按实际工作电流计算 I^2·R 并预留散热空间。
- 插件型适合手工装配与波峰焊，板上布局保持引脚短且走线疏导，以减少寄生电感/电阻影响。
六、包装与质量
由谱罗德生产，适配常规电感测试、耐温和焊接可靠性检测，适合工业批量采购与长期供货需求。
PDPTAT1012-102K 在中低频电源滤波与噪声抑制中提供稳定、经济的解决方案，选型时请结合工作电流与温升要求评估是否需要更高饱和电流或更低 DCR 的替代品。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
