Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
RUILON 2R600TD-8 2R600TD
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- RUILON 2R600TD-8
- Type
- RUILON
- Minimum package
- 800 编带
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- RUILON
- Electronic Component
- 2R600TD-8
- Electronic Component
- 1
- Package
- Through-hole, D8x L10mm
- Electronic Component
- 2
- Electronic Component
- (GDT)
- Electronic Component
- ±20%
- Electronic Component
- 2.24g
- Electronic Component
- 1
- (φD)
- 8mm
- Electronic Component
- BM0227783647
- Operating Temperature
- 40℃~+90℃
- Capacitor
- 1.5pF
- Electronic Component
- Electronic Component
- Electronic Component
- 800
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
2R600TD-8 产品概述
一、主要参数
2R600TD-8 是瑞隆源（RUILON）推出的一款插件式浪涌保护器件，封装为 D8×L10mm，极数：2。主要电气参数如下：直流击穿电压 Vdc = 600V，冲击击穿电压 Vimp = 1.2kV，脉冲放电电流 Ipp = 20kA，极间电容约 1.5pF，标称精度 ±20%，工作温度范围 -40℃～+90℃，直径 φD = 8mm。适用于需要高能量脉冲吸收与过压保护的场合。
二、产品特点
- 高能量吸收能力：20kA 脉冲放电能力，能够承受强雷击或开关冲击造成的大电流脉冲。
- 低极间电容：约 1.5pF，适合对信号完整性要求高的线路（如通信、数据链路）使用，影响小。
- 宽工作温度：-40℃ 至 +90℃，适应工业级环境。
- 紧凑封装：D8×L10mm 插件形式，便于传统波峰焊/手工插件安装与更换。
- 稳定的击穿等级：Vdc 600V、Vimp 1.2kV，便于在系统设计中进行电压边界控制和配合其他保护元件使用。
三、应用场景
- 通信设备防雷：基站前端、防雷模块、传输线接口等对外接口的浪涌防护。
- 工业控制：PLC、变频器、控制柜中对电磁脉冲或开关过电压的保护。
- 电源与配电：配电箱的末级保护或作为多级保护体系中的高能量吸收元件。
- 仪器仪表：对敏感测量线路提供过压钳位，减少瞬态对器件的冲击。
四、封装与安装建议
- 封装形式：插件，尺寸 D8×L10mm，便于更换与检修。安装时应保证良好接地路径和短回流路径以利于能量分流。
- PCB 布局：保护器件接地端与系统接地之间应尽可能短且粗；信号线/电源线走向应避免环路过大，以降低感性耦合导致的二次过电压。
- 配合设计：建议与串联限流器、熔断器、压敏电阻等元件配合使用，形成多级保护，提高系统可靠性。
五、使用注意事项
- 器件在经历大电流冲击后应更换，避免复用带来潜在失效风险。
- 存放与使用环境应避免强腐蚀性气体、长时间潮湿或高温环境，以延长器件寿命。
- 使用前请确认工作电压与器件 Vdc、Vimp 匹配，避免常态下频繁接近击穿电压导致性能劣化。
六、检测与故障排查建议
- 常规检测：可对器件进行直流耐压测试（不超过额定 Vdc）与脉冲模拟测试，核实击穿特性。
- 故障排查：若线路频繁触发保护或出现高泄漏，应检查是否有反复雷击或接地不良，必要时更换器件并排查上游问题。
- 维护更换：建议将该器件作为维护备件之一，尤其是在雷电频发地区，定期检查并替换受损元件。
本产品适合用于需要高能量浪涌吸收且对信号完整性有要求的场合。具体应用选型与并联/串联配置建议结合实际电路环境与系统保护策略，由工程师依据系统风险等级做最终确定。如需更详细的电气特性曲线或测试报告，请联系 RUILON 或授权经销商获取进一步资料。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
