Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
RUILON ZMM36V
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- RUILON ZMM36V
- Type
- RUILON
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- RUILON
- Electronic Component
- ZMM36V
- Electronic Component
- 1
- Package
- SOD-80
- Electronic Component
- Zener Diode
- Electronic Component
- 0.047g
- Electronic Component
- 1
- (Zzk)
- 220Ω
- (Zzt)
- 80Ω
- Electronic Component
- BM0258874071
- Diode
- 1
- Current(Ir)
- 2uA
- Power Dissipation(Pd)
- 500mW
- Electronic Component
- 34V~38V
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ZMM36V — RUILON 36V 稳压二极管（SOD-80，500mW）产品概述
一、产品概况
ZMM36V 是 RUILON（瑞隆源）出品的一款独立封装稳压二极管，标称稳压值 36V，允许范围 34V~38V。器件以反向工作方式提供稳压功能，常用于小功率电源、参考源和保护电路。封装为 SOD-80，单只独立元件，便于安装与替换。
二、主要电气参数
- 标称稳压值（Vz）：36V（范围 34V~38V）
- 反向漏电流（Ir）：2 μA（典型/最大值按厂家数据）
- 最大耗散功率（Pd）：500 mW（器件在环境温度 25°C 时的额定耗散）
- 动态阻抗（Zzt）：80 Ω（在厂家测试条件下的稳态阻抗）
- 转折阻抗（Zzk）：220 Ω（在低电流区或 knee 区域测得的阻抗）
以上参数为典型应用参考，具体数值应以厂方数据手册及实际工况为准。
三、应用场景
ZMM36V 适用于：
- 36V 级别的基准稳压与偏置电路
- 小功率直流电源的过压保护或箝位（如适配器、仪表）
- 信号链路的电压钳位与瞬态抑制
- 测试与校准装置中作为参考点或保护器件
其 500 mW 的耗散能力适合低功率、间歇性或受限空间的电子产品。
四、热管理与使用建议
- 最大耗散 500 mW 为 25°C 条件下额定值，工作温度升高时需按厂方的温度系数或功率降额曲线进行降额设计。
- 建议在 PCB 设计中为 SOD-80 留出适当散热铜箔，并避免把发热源集中安置在器件附近。
- 当稳压二极管作功率耗散主体时，应采用串联限流电阻或前级稳压器以限制器件上的电流，防止长期过热。
五、封装与安装
SOD-80 小型封装适合自动贴片或手工焊接。推荐遵循以下安装要点：
- 焊接温度与时间按厂家回流焊曲线或手工焊接规范控制，避免过热损伤器件。
- 标签与极性需核对，稳压二极管在电路中以反向（阴极接正极电源）工作。
- 运输与储存避免潮湿，高温环境，开封后按防潮规范使用。
六、可靠性与选型要点
选择 ZMM36V 时应关注实际工作电流、允许功耗与环境温度，必要时选择更大功率等级或并联/改用封装更大器件。对于精密参考用途，应评估温漂、动态阻抗和漏电流在工作点的影响；作为保护元件时要考虑瞬态能量吸收能力与重复冲击能力。
总结：ZMM36V 在体积小、安装方便的前提下提供 36V 级稳压功能，适用于多种低功耗稳压与保护场景。使用时注意热降额与合理限流，可以获得稳定且可靠的工作表现。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
