Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
RUILON 10D101K
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- RUILON 10D101K
- Type
- RUILON
- Minimum package
- 500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- RUILON
- Electronic Component
- 10D101K
- Electronic Component
- 1
- Package
- Through-hole, P=7.5mm
- Electronic Component
- Varistor Resistor
- Electronic Component
- 22J
- Electronic Component
- 1g
- Electronic Component
- 1
- Varistor Voltage
- 110V
- Electronic Component
- BM0259546647
- Voltage
- 165V
- Static Power
- 400mW
- Static Capacitor
- 1.7nF@1kHz
- Operating Voltage(AC)
- 60V
- Operating Voltage(DC)
- 85V
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
10D101K 产品概述
一、概述
10D101K 为 RUILON（瑞隆源）品牌的插件式压敏电阻（MOV），典型用于对电源输入、直流/交流低压回路及信号线路提供浪涌吸收与过压保护。器件尺寸为插件封装，引脚间距 P=7.5mm，便于穿孔板与传统插装工艺安装。
二、主要电气参数
- 压敏电压（Vr）：110V（标称值，用于说明在规定测试电流下的触发电压等级）。
- 钳位电压：165V（在额定浪涌条件下对输入过电压的钳位水平）。
- 工作电压：DC 85V，AC 60V（适用于直流或交流低压保护场景，建议长期工作电压不超过此值以保证寿命）。
- 峰值浪涌电流：3.5kA（短时冲击能力强，适合抵抗大能量脉冲）。
- 吸收能量：22J（表征单次冲击时可吸收的能量容量）。
- 静态电容：1.7nF @1kHz（对高速信号或滤波电路有一定影响，需在线路设计时考虑）。
- 静态功率：400mW（长期直流漏电耗散，用于热管理计算）。
三、典型应用场景
适用于电源输入端、开关电源次级、通信设备防护（如-48V系统）、仪器仪表、工业控制设备及其它需要抑制瞬态过电压的场合。由于电容值约1.7nF，不推荐在极高速信号链路中直接并联使用，除非能接受该电容带来的带宽影响。
四、选型与设计要点
- 确保工作电压裕量：长期直流或交流电压不要接近标称工作电压，建议留出至少20–30%裕量以延长使用寿命。
- 浪涌与能量匹配：根据系统可能出现的冲击波形（如雷击、开关浪涌）选择合适的能量和峰值电流余量；必要时配合熔断器或气体放电管共同防护。
- 信号完整性考虑：在敏感模拟或数字高速线路上，评估1.7nF电容对传输带宽及时延的影响，必要时改用低电容型防护器件。
五、安装与可靠性建议
插件安装时保持引线短而直，减少环路电感；避开高温焊接区域，按常规焊接工艺控制温度与时间以免器件热冲击。压敏电阻为能量吸收器件，长期遭受频繁大能量冲击会逐步退化，应在设计中考虑寿命及替换方案；关键场合建议配合监测电路或熔断器，一旦器件损坏可迅速隔离，防止连带故障。
六、采购信息与封装
型号：10D101K，品牌：RUILON（瑞隆源），封装形式：插件，P=7.5mm。订购时请确认规格表中测试条件（测试电流、冲击波形）与系统需求一致，以保证选型准确。
如需更详细的电气曲线、脉冲波形下的钳位特性或封装图纸，可提供具体需求，我可协助进一步核对与匹配。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
