Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
RUILON RL60-010 RL60
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- RUILON RL60-010
- Type
- RUILON
- Minimum package
- 1000 袋装
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- RUILON
- Electronic Component
- RL60-010
- Electronic Component
- 1
- Package
- Through-hole
- Electronic Component
- Resettable Fuse
- Electronic Component
- 0.096g
- Electronic Component
- 1
- Electronic Component
- 8s
- Electronic Component
- BM0258874038
- Voltage Rating(Vmax)
- 60V
- Power(Pd)
- 510mW
- Current(Imax)
- 40A
- Electronic Component
- Electronic Component
- Electronic Component
- 1000
- Latching Current(Ihold)
- 100mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RL60-010 产品概述
一、概述
RL60-010 是瑞隆源（RUILON）推出的一款插件式自恢复熔断器（PTC 热敏复位保险器），适用于低压直流电路的过流保护。器件在短路或过流时能迅速升温增阻，实现断开保护；故障消除后随温度下降自动恢复导通，便于重复使用，适合需要多次保护且维护不便的场合。
二、主要参数
- 额定耐压（Vmax）：60V DC
- 最大电流（Imax，短时）：40A
- 保持电流（Ihold）：100mA（环境温度 25°C 标称）
- 跳闸电流（Itrip）：200mA（典型触发值）
- 动作时间：8 s（在 Itrip 条件下典型动作时间）
- 功耗（Pd）：510 mW（25°C 时的功耗参考）
- 初始阻值（Rmin）：2.5Ω（出厂冷态阻值参考）
- 跳断后阻值（R1max）：12Ω（升温后高阻态参考）
- 封装形式：插件（适合手工插装或板载插接）
三、工作原理与性能特点
RL60-010 基于聚合物正温度系数（PTC）材料，常态下电阻较低，允许 100mA 以下电流长期通过；当电流超过 Itrip 时，器件内部温度上升导致电阻显著增大至数欧姆甚至十几欧姆，从而限制电流并实现保护。故障消除并冷却后恢复至低阻态，无需更换。其特点包括响应可靠、可重复使用、对浪涌有较好承受能力（短时可达 40A），且对电路插拔维护友好。
四、典型应用场景
- 通信设备和网关的线路保护（电话、调制解调器低压回路）
- 电池供电系统与便携设备的过流和短路保护（低压直流）
- 传感器、开关电源控制端、微控制器供电线路保护
- USB 外设、模块化仪表、电源管理开发板等需可复位保护的场景
五、安装与使用建议
- 推荐工作电压不超过 60V DC；不建议用于交流市电直接保护。
- 长期工作电流应小于 Ihold，并留有裕量；尽量避免在接近 Itrip 的条件下长期运行，以延长器件寿命并减少误跳。
- 环境温度与散热条件会影响保持电流与动作时间，25°C 下参数为参考值；高温会降低 Ihold 值，应做必要的热降额。
- 插件安装时保证良好接触与可靠固定，避免机械应力；如需焊接，请参照厂方焊接温度/时间建议，防止热损伤。
六、可靠性与安全要点
- RL60-010 为复位型过流保护器件，不替代一次性快速熔断器或需隔离的安全元件；对于绝缘或防触电要求的场合，应按规范选用相应认证元件。
- 建议在设计阶段做实际温升与动作测试，评估在目标系统中的触发特性与重复性。
- 对于高能量故障（大电流、长持续时间），需在系统层面配合限流或双重保护策略以避免器件损坏或失效。
七、订购信息
型号：RL60-010；品牌：RUILON（瑞隆源）；封装：插件自恢复熔断器。订购时请确认工作环境温度、额定电压与电流需求，必要时联系供应商获取详细热特性曲线与样品检测支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
