Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG RVE1C100M0405
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG RVE1C100M0405
- Type
- ROQANG
- Minimum package
- 2000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- RVE1C100M0405
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- SMD,D4xL5.4mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.215g
- Electronic Component
- 1
- Electronic Component
- BM0264860503
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 55℃~+105℃
- Current
- 60mA@120Hz
- Voltage
- 16V
- Capacitor
- 4mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
RVE1C100M0405 产品概述
一、产品简介
RVE1C100M0405 为 ROQANG（容强）品牌的贴片铝电解电容，标称容量 10 µF，额定电压 16 V，允许偏差 ±20%。封装为 SMD，电容体尺寸 D4 × L5.4 mm。典型等效串联电阻（ESR）为 3.2 Ω，纹波电流 60 mA（@120 Hz），工作温度范围 -55 ℃ 至 +105 ℃，额定寿命 2000 小时（105 ℃ 下）。
主要参数速览：
- 容值：10 µF ±20%
- 额定电压：16 V
- ESR：3.2 Ω
- 纹波电流：60 mA @120 Hz
- 外形尺寸：直径 4 mm × 长度 5.4 mm
- 工作温度：-55 ℃ ~ +105 ℃
- 寿命：2000 hrs @105 ℃
二、主要特性与性能提示
- 小外形、SMD 封装，适合高密度 PCB 布局；极性产品，安装时注意极性标识。
- 低频滤波和去耦效果良好；在 120 Hz 纹波条件下额定纹波电流 60 mA。
- 由 ESR 可估算纹波引起的峰值纹波电压 Vr ≈ Ir × ESR = 0.06 A × 3.2 Ω ≈ 0.192 V；耗散功率 P ≈ I^2 × ESR ≈ 0.06^2 × 3.2 ≈ 12 mW，热升温较小，但在并联或高频、大电流环境下需注意发热累积。
三、典型应用场景
- 便携式与消费类电子的电源去耦、滤波与稳压器输入/输出端。
- 小电流 DC-DC 模块、手持设备的旁路/退耦元件。
- 对体积与高度有限制的电路板低频滤波应用。
四、使用与选型建议
- 建议电压打余量：实际工作电压最好低于额定电压的 70%~80% 以提高寿命和可靠性，避免长期在 100% 额定电压下工作。
- 温度对寿命影响显著：厂方给出 2000 hrs@105 ℃，按经验法则（温度每降低 10 ℃ 生命周期约翻倍），在 85 ℃ 下寿命可大幅增加；实际设计应以系统平均温度为准。
- 若需更低 ESR 或更高纹波承受能力，可并联多只或考虑固体电解/钽/陶瓷电容混用以优化低频与高频性能。
- 装配时采用推荐回流焊温度曲线，避免超出厂家许可的回流峰值温度；焊盘与贴装孔位按资料卡设计，保持良好焊接可靠性。
五、可靠性与储存
- 本型号为有极性电容，长时间闲置或高温贮存后有修复（再化成）需求；若超过厂方建议的贮存期，建议在安全电压下进行恢复处理。
- 储存环境建议干燥、避免潮湿与高温；具体包装（托盘/卷带）和保质期请以出厂资料为准。
六、采购信息
- 品牌：ROQANG（容强）
- 型号：RVE1C100M0405
- 封装：SMD，D4×L5.4 mm
如用于关键或高可靠性场合，建议提供样品进行温度循环、纹波老化及实际工况验证，或联系容强获取完整数据表与回流焊曲线。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
