Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
ROQANG CK1V100M-CRC54 CK1V100M
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- ROQANG CK1V100M-CRC54
- Type
- ROQANG
- Minimum package
- 2000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- ROQANG
- Electronic Component
- CK1V100M-CRC54
- Electronic Component
- 1
- Electronic Component
- 10uF
- Package
- SMD,D4xL5.4mm
- Electronic Component
- SMD Aluminum Electrolytic Capacitor
- Electronic Component
- ±20%
- Electronic Component
- 0.14g
- Electronic Component
- 1
- Electronic Component
- BM0264860536
- Electronic Component
- 2000hrs@105℃
- Operating Temperature
- 40℃~+105℃
- Current
- 14mA@120Hz
- Voltage
- 35V
- Capacitor
- 4mm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
CK1V100M-CRC54 产品概述
一、产品简介
CK1V100M-CRC54 是容强（ROQANG）推出的一款贴片型铝电解电容，规格为 10µF ±20%，额定电压 35V，封装 SMD，电容体尺寸 D4 × L5.4mm。该型号以小型化外形适配高密度贴片组装，适用于对体积与成本敏感的电源滤波和去耦场合。
二、主要参数
- 容值：10µF ±20%
- 额定电压：35V
- 纹波电流：14mA @ 120Hz（标称）
- 电容体尺寸：直径 4mm × 长度 5.4mm（D4×L5.4mm）
- 工作温度范围：-40℃ ～ +105℃
- 工作寿命：2000 小时 @ 105℃
- 封装形式：SMD（贴片）
- 品牌：ROQANG（容强）
三、性能特点
- 小型化封装，适合高密度 PCB 布局，节省空间。
- 标准电压 35V，适配中低压电源轨滤波。
- 容值 10µF 配合较低体积，适用于局部去耦与旁路滤波。
- 工作温度覆盖工业级范围（-40℃ 至 +105℃），适用环境温度变化较大的场合。
- 壽命规格 2000 小时 @105℃，可通过温度降额获得更长实际寿命（经验法则：每降 10℃ 寿命近似翻倍）。
四、典型应用
- 开关电源与 DC-DC 转换器的输入/输出滤波。
- PCB 局部去耦与电源旁路，降低高频干扰。
- 工业与消费类电子中需小体积电容的滤波场景。
- 对于高纹波能量的应用（如大电流整流输出）不建议使用，因标称纹波电流较小（14mA@120Hz）。
五、设计与使用建议
- 极性注意：为铝电解电容，使用时必须遵守极性，防止反接。
- 纹波与散热：所标纹波电流较低，若电路中纹波或交流成分较大，应选用纹波能力更强或更大尺寸的电容；同时保证良好散热以延长寿命。
- 电压降额：为提高可靠性与寿命，实际设计中建议在必要时对额定电压进行适当降额（如 50%～80% 视应用而定）。
- 布局：贴片焊盘与走线应尽量缩短与电容的连接距离，减少串联电感；避免将热源直接置于电容附近。
- 存储与焊接：遵循厂商的储存与回流焊工艺建议，长时间存储后可能需要预处理或“再形成”以恢复电性能。
六、质量与可靠性
本型号按容强相关质量控制生产，工作寿命标称为 2000 小时（105℃）。在典型工业应用中，通过降额与改善散热可大幅延长实际使用寿命。建议在关键可靠性项目中参考厂商完整数据手册并进行样机验证。
七、封装与订购信息
- 封装：SMD（D4×L5.4mm）便于自动贴装与回流焊接。
- 订购时请确认完整料号与批次、包装形式（卷盘或散装）以及是否需要特殊筛选或老化测试。
- 如需更高纹波能力或更长寿命的替代方案，可联系供应商获取同系列或相近系列的推荐型号及样品。
如需进一步的电气特性曲线、ESR/阻抗频率响应或回流焊曲线等详细资料，建议索取容强（ROQANG）提供的正式数据手册以做最终设计验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
