Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Sunlord SDCL1005C8N2JTDFM01
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Sunlord SDCL1005C8N2JTDFM01
- Type
- SUNLORD
- Minimum package
- 10000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- SUNLORD
- Electronic Component
- SDCL1005C8N2JTDFM01
- Electronic Component
- 1
- Package
- 0402
- Type
- Inductor
- Electronic Component
- SMD Inductor
- Electronic Component
- ±5%
- Electronic Component
- 0.019g
- Inductor
- 8.2nH
- Electronic Component
- 1
- Factor
- 8@100MHz
- Electronic Component
- BM0257715846
- Current
- 550mA
- Frequency
- 3.6GHz
- Resistor(DCR)
- 400mΩ
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SDCL1005C8N2JTDFM01 产品概述
一、产品简介
SDCL1005C8N2JTDFM01 是顺络（Sunlord）推出的一款贴片叠层电感，封装为0402（1005公制）。该器件名义电感值为 8.2 nH，容差 ±5%，额定直流电流 300 mA，直流电阻（DCR）约 400 mΩ。小尺寸、高可靠性，适用于空间受限的高频前端与滤波电路。
二、主要参数
- 电感值：8.2 nH ±5%（标准测量频率和条件见厂商数据手册）
- 额定电流：300 mA（连续工作电流，超过该值可能引起磁心饱和或温升）
- 直流电阻：约 400 mΩ（对小信号/射频应用造成一定损耗，应在选型时考虑）
- 类型：叠层片式电感（multilayer chip inductor）
- 封装：0402（1005公制）
- 品牌：Sunlord（顺络）
三、结构与封装特征
该器件为多层卷绕/叠层磁性材料制成的片式电感，体积小、引脚端面金属化处理，适合回流焊工艺。0402 尺寸利于高密度 PCB 布局，但机械强度和载流能力受限于尺寸，焊接与贴装要求严格控制工艺。
四、性能特点与选型要点
- 小电感值适合射频匹配、阻抗调节与高频滤波。
- 400 mΩ 的 DCR 表明存在一定的直流损耗，若用于功率传输或要求极低损耗的射频链路，应评估替代品或更低 DCR 的型号。
- ±5% 精度适合许多匹配与滤波应用，但对精密谐振回路需考虑配合可调元件。
- 额定电流 300 mA 指示适合小电流信号链，不建议用于大电流滤波或能量传递场合。
五、典型应用
- 无线射频前端（天线匹配、串联阻抗）
- 高频共模/差模滤波与 EMI 抑制（对高频噪声具有良好表现）
- 高频振荡器与滤波网络中的小量程电感
- 高速数字接口的阻抗补偿与滤波（需评估损耗）
六、PCB 布局与焊接建议
- 贴片位置尽量靠近被滤波或匹配的器件，走线最短、转角处保护良好接地。
- 遵循顺络数据手册的推荐焊盘（land pattern）与回流曲线；常规无铅回流温度峰值约 260°C。
- 小封装对温度与机械应力敏感，避免过度热应力和机械振动；贴装后建议进行焊接后电气测试确认。
七、测试与可靠性
- 建议在PCB上进行实装后测量电感值、Q 值与 DCR，以验证工艺影响。
- 对于量产，应包括温升、振动、热循环与湿热测试以确认可靠性。
- 存储建议遵循防潮包装，必要时在回流前进行烘烤处理。
八、采购与替代方案
- 型号：SDCL1005C8N2JTDFM01（顺络）通常以卷带（tape & reel）方式供应，适合SMT贴片生产。
- 选型时若对 DCR 或守流能力有更高要求，可咨询顺络或寻找同规格但更低 DCR/更高电流等级的型号作为替代。
如需更详细的频率响应、温度系数、推荐焊盘尺寸或回流曲线，请提供确认后查阅顺络官方数据手册并根据实际电路环境调整选型与版图。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
