Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOGIALED TJ-S1005CL4T5ALC2G-A5
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOGIALED TJ-S1005CL4T5ALC2G-A5
- Type
- TOGIALED
- Minimum package
- 5000 编带
Technical parameters
- Power
- 111mW
- Electronic Component
- Electronic Component
- Electronic Component
- TOGIALED
- Electronic Component
- TJ-S1005CL4T5ALC2G-A5
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- 520nm~530nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.024g
- Electronic Component
- 1
- LED
- 630mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0229921585
- Electronic Component
- 525nm
- Operating Temperature
- 40℃~+80℃
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TJ-S1005CL4T5ALC2G-A5 产品概述
一、概述
TJ-S1005CL4T5ALC2G-A5 是 TOGIALED（统佳）推出的一款高亮度翠绿色贴片LED，采用0402（SMD）超小封装，面向对体积、功耗与可视效果有严格要求的便携电子与背光应用。该型号以窄谱带、高显色性和宽视角为特点，适用于微型指示、仪表、穿戴设备及小型显示模块等场景。
二、主要参数
- 发光颜色：翠绿色（Peak 525nm，波长范围 520–530nm）
- 峰值波长：525nm
- 正向电流：If = 20mA（推荐驱动）
- 正向电压：Vf = 2.8V ~ 3.4V（典型值约 3.1V）
- 最大功耗：111mW
- 发光强度：630mcd（测试条件下）
- 发光角度：120°（宽视角）
- 透镜颜色：无色透明（纯色输出，色偏小）
- 工作温度：-40℃ ~ +80℃
- 封装：0402 SMD，载带方式：正贴（Face-up）
三、封装与贴装
0402 超小封装非常适合对空间有限制的设计。产品提供正贴载带，兼容常见的自动贴片机。请按照标准0402的PCB焊盘焊接设计，控制焊膏量以避免焊点过大导致光学遮挡或热应力问题。推荐在回流焊曲线中使用符合LED材料的温度梯度，避免超过推荐回流峰值温度。
四、光学与电气特性
翠绿色峰值525nm具备良好的视觉明亮度与辨识度，发光强度630mcd在0402体积下表现优秀。120°宽视角确保在较大观察范围内保持均匀可视。典型驱动为20mA直流电流，设计时建议采用限流电阻或恒流源驱动。限流电阻示例（以5V供电、Vf取典型3.1V、If=20mA）：R ≈ (5−3.1)/0.02 ≈ 95Ω，常用100Ω标准值。
五、散热与可靠性
尽管单颗LED功耗较低，但在高电流或密集布放时需关注PCB散热与热汇流路径。最大工作温度80℃，建议在高温环境下控制平均驱动电流或采用脉冲驱动以延长寿命。遵循统一的焊接工艺规范和防潮存储（一般为未开封密封干燥包装），可保持长期可靠性。
六、典型应用
- 仪表指示与状态显示（医疗设备、工控面板）
- 可穿戴设备与智能手环指示灯
- 消费电子微型背光与提示灯
- 小型光源阵列与装饰照明
七、使用注意事项
- 建议在设计前确认工作电流与预期亮度，避免长期过驱导致寿命下降；
- 生产与维修过程中注意静电防护（ESD）；
- 存储应保持干燥密封，避免受潮导致焊接缺陷；
- 回流焊参数请参考供应商推荐曲线，避免超过材料耐受温度；
- 同一批次使用以保证色致一致性，需严格控制Bin分选要求。
如需更多资料（电气图、回流焊曲线、尺寸图与光谱曲线）或大批量采购支持，请联系 TOGIALED（统佳）技术与销售代表获取对应数据手册与样品。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
