Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
TOGIALED TJ-S1608SW6TGLCCW-A5
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- TOGIALED TJ-S1608SW6TGLCCW-A5
- Type
- TOGIALED
- Minimum package
- 4000 圆盘
Technical parameters
- Power
- 108mW
- Electronic Component
- Electronic Component
- Electronic Component
- TOGIALED
- Electronic Component
- TJ-S1608SW6TGLCCW-A5
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 7000K~12000K
- Electronic Component
- 0.02g
- Electronic Component
- 1
- LED
- 700mcd
- LED
- 120°
- LED
- Electronic Component
- Electronic Component
- BM0264488294
- Operating Temperature
- 40℃~+80℃
- Current
- 20mA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
TJ-S1608SW6TGLCCW-A5 产品概述
一、产品简介
TJ-S1608SW6TGLCCW-A5 为 TOGIALED（统佳）出品的高亮度0603贴片白光LED（公制1608封装）。本器件采用独立二极管结构、黄色透镜设计，色温在7000K～12000K之间，呈冷白至蓝白光，适用于需要高显色与显著亮度的微型背光与指示场合。封装小巧，便于高密度贴片应用。
二、光学与电气性能
- 发光颜色：白色（冷白/蓝白）
- 色温：7000K ~ 12000K
- 发光强度：典型700 mcd（在标准驱动条件下）
- 发光角度：120°（宽光束，视角大）
- 正向电压（Vf）：3.6 V（在20 mA）
- 正向电流：20 mA（推荐驱动电流）
- 额定功率：108 mW（器件规格标注），典型功耗按Vf×If计算约72 mW。
以上参数为典型/额定值，实际应用请参照产品数据手册进行热与电条件的确认。
三、温度与可靠性
工作温度范围：-40 ℃ 至 +80 ℃，适应严苛环境下的指示与显示需求。为确保长期可靠性，建议在PCB设计中考虑良好的散热路径和热阻控制，并避免长时间在最大额定电流和高温环境下连续工作。
四、封装与工艺建议
- 封装规格：0603（1608公制），适配主流贴片机与回流焊工艺。
- 透镜颜色：黄色透镜，有利于改善白光色温稳定性与视感。
- 推荐工艺：兼容标准SMT回流焊流程。为保证焊接品质与器件性能，建议参考厂家提供的回流曲线及PCB焊盘模型，采用适当的焊膏与回流温度曲线。
五、应用场景
适用于手机、平板与可穿戴设备背光、键盘/指示灯、家用电器面板、医疗设备指示、工业控制指示灯、物联网终端和各类精密仪器等需要小体积、高亮度白光的场合。
六、使用与储存注意事项
为延长器件寿命与避免静电损伤，建议在生产与装配过程中采取ESD防护措施。器件应保存在干燥、常温环境中，避免长期置于高温高湿条件。开封后若需延迟贴装，请按厂家建议进行烘烤除湿处理。电路设计时应加入限流电阻或恒流驱动，以防过流损坏；限流电阻可按公式 R = (Vsup - Vf) / I 计算。
如需批量采购、详细电气/光学特性曲线、回流曲线和推荐焊盘文件，请联系 TOGIALED（统佳）或索取 TJ-S1608SW6TGLCCW-A5 的完整数据手册。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
