Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Taiwan Lu Hai SL0630-100M SL0630
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- SL0630-100M
- Type
- Taiwan Luhai
- Minimum package
- 1000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- SL0630-100M
- Electronic Component
- 1
- Package
- SMD,7.1x6.6mm
- Electronic Component
- SMD Inductor
- Electronic Component
- ±20%
- Electronic Component
- 1.029g
- Inductor
- 10uH
- Electronic Component
- 1
- Electronic Component
- BM0265001091
- Current
- 5A
- Resistor(DCR)
- 99.5mΩ
- Electronic Component
- Electronic Component
- Electronic Component
- 1000
- and Current(Isat)
- 5.5A
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SL0630-100M 产品概述
一、产品简介
SL0630-100M 是台湾陆海（Luhai）推出的一款一体成型贴片合金电感，属于高电流功率型 SMD 电感器件。器件封装尺寸为 7.1 x 6.6 mm，适合自动贴片生产，结构为一体成型，定位为电源滤波与能量储存应用的解决方案。
二、主要电气与机械参数
- 电感值：10 μH
- 公差：±20%
- 额定电流（Irated）：5 A（连续）
- 饱和电流（Isat）：5.5 A（典型）
- 直流电阻（DCR）：99.5 mΩ
- 封装形式：SMD，尺寸 7.1 x 6.6 mm
- 类型：合金注塑/一体成型贴片电感
- 品牌：台湾陆海（Luhai）
以上参数为基本规格，实际应用应以厂商完整数据表与频率/温度特性曲线为准。
三、关键性能与特点
- 高电流承载能力：额定电流 5 A、饱和点约 5.5 A，适合中等电流的电源轨滤波与能量传输。
- 结构稳固：一体成型设计提高机械强度和温度循环可靠性，便于波峰/回流焊工艺。
- 尺寸合理：7.1 x 6.6 mm 的 SMD 封装在功率密度与布局灵活性间取得平衡。
- 注意 DCR 值：99.5 mΩ 的直流电阻相对较高，会带来明显的 I^2R 损耗与温升，需要在系统功率预算中考虑。
四、典型应用场景
- DC–DC 降压/升压转换器的输入/输出滤波器
- 电源管理模块（PMIC）和输出滤波器
- 工业与通信设备的局部电源滤波
- 对体积和自动化贴装有要求的电源模块设计
如需用于高效率或高功率密度系统，建议评估 DCR 带来的额外损耗。
五、选型与使用建议
- 电流预留与降额：为降低饱和与温升风险，建议持续工作电流保守取额定值的 70–80%（即约 3.5–4 A），峰值短时可接近 Isat。
- 损耗估算：直流损耗可由 P = I^2 × DCR 估算。举例：在 4 A 连续电流下，P ≈ 4^2 × 0.0995 ≈ 1.6 W（仅供近似参考），需关注温升与散热。
- 布局与焊接：走线尽量短、截面积足够，输出/输入侧使用固体地平面以降低寄生阻抗；遵循厂家回流焊温度曲线进行焊接。
- 温度与频率特性：不同频率和温度下电感值、损耗和饱和特性会变化，关键应用须索取并参考完整的频率响应和温度系数曲线。
- 替代与对比：若系统对效率和热限要求高，考虑选用更低 DCR 的电感或更大封装/绕线结构的器件以降低 I^2R 损耗。
六、可靠性与采购注意事项
- 要求 BOM 管理时，核对供应链与原厂型号，确认物料号 SL0630-100M 与生产批次信息。
- 获取完整数据手册：包含 L–I 曲线、阻抗随频率变化、热阻特性、测试条件和推荐回流焊曲线。
- 可靠性验证：在产品开发阶段进行实际工况下的温升、振动与寿命测试，确认满足长期工作要求。
如需更详细的频率响应曲线、温升测试数据或推荐替代型号，可提供电路工作电流、允许温升和效率目标，我可以根据这些条件给出更具体的选型建议。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
