Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
UMW 1N4007(A7) 1N4007
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- UMW 1N4007(A7)
- Type
- UMW
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- UMW
- Electronic Component
- 1N4007(A7)
- Electronic Component
- 1
- Package
- SOD-123FL
- Electronic Component
- General Purpose Diode
- Electronic Component
- 0.04g
- Electronic Component
- 1
- Electronic Component
- BM0227327788
- Current
- 1A
- Diode
- 1
- Current(Ir)
- 5uA@1kV
- (Vf)
- 1.1V@1A
- Electronic Component
- 55℃~+150℃
- Electronic Component
- Electronic Component
- Electronic Component
- 3000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
1N4007 (A7) — 通用高压整流二极管 产品概述
一、产品简介
UMW（友台半导体）出品的 1N4007(A7) 是一款通用型硅整流二极管，适用于高压整流与一般保护电路。器件在 1A 电流工况下典型正向压降为 1.1V，具备 1kV 的直流反向耐压和在该电压下 5μA 的低反向漏电流，结温工作范围宽（-55℃～+150℃），适应工业级温度要求。
二、主要规格与特性
- 正向压降 (Vf)：1.1V @ 1A（典型）
- 直流反向耐压 (Vr)：1000V
- 额定整流电流：1A（直流）
- 反向电流 (Ir)：5μA @ 1kV
- 工作结温范围：-55℃ ～ +150℃
- 器件类型：通用整流二极管，恢复时间相对较长，不适合高频开关场合
这些参数表明该器件在高压直流整流、反向保护和一般电源线路中的可靠性较好，且在高压下保持较小的泄漏电流。
三、封装与引脚
封装：SOD-123FL，适合表面贴装工艺（SMT）。
引脚与极性：封装上通常有阴极（K）标识带，安装时注意极性方向。SOD-123FL 体积小，便于高密度 PCB 布局，但散热能力受限，需在布局时考虑铜箔散热。
四、典型应用
- 高压整流电路（例如高压电源、整流模块）
- 反向极性保护与浪涌保护电路
- 工业电源与仪器设备的低频整流场合
注意：若为高频开关电源或需要快速恢复的场合，应选择快速恢复或肖特基二极管。
五、热管理与使用注意
SOD-123FL 封装散热依赖 PCB 铜箔与周边走线，建议在器件下方和侧面增加散热铜箔并通过热过孔与内层或底层铜连接。长期可靠运行应避免结温接近上限，按经验对额定电流进行降额使用并监控结温。装配时遵循 SMT 焊接工艺规范，避免多次回流造成封装应力。
六、可靠性与测试建议
建议在设计验证阶段做以下测试：高压耐压测试、温度循环、ESD 和浪涌冲击测试，以及在目标应用下的长期老化测试。关注在高电压下的反向漏流随温度上升的变化，以确保在高温工况下仍满足系统要求。
七、替代与选型建议
1N4007(A7) 适合替代传统 1N4007 的高压整流用途，但若需要更低正向压降或更快恢复时间，可选用肖特基或快恢复二极管。选型时关注耐压、正向压降、漏电流、恢复时间与封装散热能力的权衡。
以上为基于 UMW（友台）1N4007(A7) 的产品概述与工程建议，如需详细的电气特性曲线、封装尺寸或推荐 PCB 尺寸，请告知，我可提供更具体的数据与参考布局示意。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
