Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
UMW SD15
Configuration
1 options
Configuration
Electronic Component
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- UMW SD15
- Type
- UMW
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- UMW
- Electronic Component
- SD15
- Electronic Component
- 1
- Package
- SOD-323
- Electronic Component
- Electronic Component
- Type
- ESD
- Electronic Component
- ESD and Surge Protection (TVS / ESD)
- Electronic Component
- 0.028g
- Electronic Component
- 1
- Channel Count
- Electronic Component
- Cj- Capacitor
- 120pF
- Electronic Component
- BM0265376740
- Voltage
- 24V
- Electronic Component
- IEC 61000-4-4；IEC 61000-4-2
- Current(Ir)
- 1uA
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
SD15 产品概述
一、概述
SD15 是友台半导体（UMW）推出的一款单路单向瞬态抑制二极管（TVS），封装为 SOD-323，专为对抗静电放电（ESD）和电快速瞬变（EFT）而设计。器件针对一般电子接口与电源线的瞬态过电压保护，具有高脉冲能量吸收能力和低反向漏电的特性，适合消费类、工业与通信设备的端口保护使用。
二、主要电气参数
- 极性：单向
- 反向工作电压 Vrwm：15 V
- 击穿电压（Vbr）：16.7 V
- 钳位电压（Vclamp）：24 V（典型）
- 峰值脉冲功率 Ppp：350 W（8/20 μs 波形）
- 反向电流 Ir：≤1 μA
- 结电容 Cj：≈120 pF
- 通道数：单路
- 防护等级：符合 IEC 61000-4-4（EFT）与 IEC 61000-4-2（ESD）测试
- 封装：SOD-323
三、特点与优势
- 高脉冲吸收能力：350 W（8/20 μs）能有效吸收来自雷击或电源瞬变的能量，提升系统抗扰度。
- 低泄漏电流：反向漏电≤1 μA，有利于降低静态功耗，适用于电源管理与低功耗模块。
- 小巧封装：SOD-323 体积小，便于密集布板与自动化贴装。
- 单向保护：对正向受保护方向提供低导通压降，对多数低压电源和信号线有良好适配。
- 标准兼容：通过 IEC 61000-4-2/4-4 规范测试，便于系统设计满足电磁兼容要求。
注意：Cj≈120 pF 对高速差分信号（如高速 USB、LVDS 等）可能影响信号完整性，不建议用于对结电容敏感的高速接口。
四、典型应用场景
- USB/串口等低速或电源相关接口的浪涌与静电保护（适用于对电容容忍度较高的线路）。
- 工业控制、仪表和传感器接口的瞬态浪涌防护。
- 消费电子设备外部接口、充电口与外接电源线路保护。
- 通信设备与基板接口的局部防护单元（在系统级防护中作为前端器件）。
五、封装与布局建议
- 尽量将 SD15 放置在被保护器件与外部接口之间的最短路径上，靠近受保护引脚布置。
- 将器件地端与系统接地通过短、粗的回流路径相连，避免长回流环路造成地电位抖动。
- SOD-323 封装焊盘设计按厂商推荐尺寸制板，确保良好湿润与可靠焊接。
- 对于高能量脉冲场景，评估周边金属层与热散设计，确保脉冲能量不会在局部引起过热。
六、可靠性与合规
SD15 按照 IEC 61000-4-2（静电放电）与 IEC 61000-4-4（电快速瞬变）进行验证，典型 8/20 μs 波形下能承受 350 W 峰值脉冲能量。出于可靠性考虑，建议在样机与量产前进行系统级 EMC 测试，验证在目标应用环境下的实际防护效果。
结语：SD15 在中低压电源与普通信号线的瞬态保护中提供了小尺寸、高能量吸收与低泄漏的平衡方案。选择时请结合目标接口对结电容与钳位电压的具体要求，进行电路仿真与实测验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece Integrated Circuit for IRS20124S IRS21956S SOP-20 IRS2453DS SOP-14
- Model
- IRS20124S
- Package
