Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Viking ARG02BTC2001
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- Viking ARG02BTC2001
- Type
- VIKING
- Minimum package
- 10000 圆盘
Technical parameters
- Power
- 62.5mW
- Electronic Component
- Electronic Component
- Electronic Component
- VIKING
- Electronic Component
- ARG02BTC2001
- Electronic Component
- 1
- Package
- 0402
- Electronic Component
- SMD Resistor
- Electronic Component
- ±0.1%
- Electronic Component
- 0.009g
- Electronic Component
- 2kΩ
- Electronic Component
- 1
- Electronic Component
- BM0264480945
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 50V
- Electronic Component
- ±25ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
Viking（光颉）ARG02BTC2001 薄膜贴片电阻产品概述
一、产品定位与核心优势
ARG02BTC2001是Viking（光颉）针对高密度精密电子设计推出的小封装薄膜电阻，核心价值集中在「精度可控、小体积适配、宽温稳定」三大维度：
- 高精密：±0.1%阻值精度+±25ppm/℃温度系数，解决传感器信号调理、精密测量中「阻值漂移影响精度」的痛点；
- 小封装：0402（1.0×0.5mm公制）封装，适配智能手机、可穿戴设备等紧凑PCB设计；
- 宽温适配：-55℃~+155℃工作范围，覆盖工业级、汽车级应用的极端温度场景。
二、关键技术参数详解
ARG02BTC2001的参数设计精准匹配精密场景，核心参数可落地验证：
参数项 具体指标 实际意义 阻值/精度 2kΩ（2001代码）±0.1% 电阻值一致性优于常规±1%电阻10倍以上 额定功率 62.5mW 0402封装典型功率，满足低功耗电路预算 最大工作电压 50V 避免电压击穿，保护电路安全 温度系数（TCR） ±25ppm/℃ 温度每变1℃，阻值仅变0.05Ω（2kΩ×25e-6） 工作温度范围 -55℃~+155℃ 覆盖工业、汽车应用的极端温度需求三、封装与物理特性
采用0402贴片封装（英制0.04″×0.02″，公制1.016mm×0.508mm），物理特性适配自动化生产与紧凑设计：
- 表面贴装设计：兼容常规SMT贴装线，生产效率高；
- 超薄厚度：约0.4mm，满足智能手表、蓝牙耳机等超薄PCB需求；
- 端子工艺：镀锡/镀金（依批次），焊接可靠性强，抗硫化性能优于常规电阻。
四、典型应用场景
ARG02BTC2001因特性匹配，广泛应用于以下领域：
- 精密测量与传感器：工业压力/温度传感器信号调理电路、数据采集卡参考电阻；
- 低功耗电子设备：智能手环、蓝牙耳机的电源管理、模拟前端电路；
- 工业控制：PLC模块反馈电阻、伺服驱动器电压分压电路；
- 汽车电子：辅助驾驶雷达传感器接口、车载信息娱乐系统精密电路；
- 通信设备：路由器、交换机射频/中频电路的偏置电阻（低功率场景）。
五、可靠性与品质保障
Viking（光颉）ARG系列通过严格可靠性测试，确保量产一致性：
- 环保认证：符合RoHS 2.0、REACH标准，无铅无卤；
- 抗环境测试：耐振动（10G~2000Hz）、耐冲击（1000G/1ms），适合移动/振动场景；
- 长期稳定性：1000小时高温负载（125℃/额定功率）后，阻值漂移≤±0.2%。
六、选型与使用注意事项
- 功率匹配：实际功耗需≤62.5mW，避免过载（例：2kΩ电阻工作电流≤5.59mA）；
- 电压限制：工作电压不超50V，防止击穿；
- 温区适配：若环境温度超出-55~+155℃，需选择更高温区的替代型号；
- 焊盘设计：0402封装需匹配PCB焊盘尺寸（推荐1.2×0.7mm），避免虚焊/短路。
ARG02BTC2001以「高精密+小体积+宽温」的组合，成为紧凑精密电子设计的实用选型，尤其适合对阻值稳定性要求严苛的场景。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
