Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
XKB Connectivity X2016WR-06-N0SN X2016WR
Configuration
1 options
Configuration
Option 180249
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- XKB Connectivity X2016WR-06-N0SN
- Type
- XKB CONNECTIVITY
- Minimum package
- 1000 袋
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- XKB CONNECTIVITY
- Electronic Component
- X2016WR-06-N0SN
- Electronic Component
- 1
- Package
- DIP
- Electronic Component
- 1
- Electronic Component
- Wire-to-Board
- Electronic Component
- 0.3g
- Electronic Component
- 2mm
- PIN
- 6P
- Electronic Component
- 1
- Electronic Component
- BM0265742975
- Electronic Component
- PA66
- Electronic Component
- Electronic Component
- Operating Temperature
- 25℃~+85℃
- Pin
- 1x6P
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
X2016WR-06-N0SN 1x6P弯插排针产品概述
一、产品核心定位与应用场景
X2016WR-06-N0SN是中国星坤（XKB Connectivity）针对小间距紧凑型信号/电源连接需求推出的单排弯插排针，聚焦“空间受限、6PIN单路传输”场景，填补了2mm间距单排6PIN弯插产品的中高端实用型空白。其设计核心是“小体积+高可靠性”，可替代传统直插排针实现侧装布局，降低设备整体厚度，适配对体积敏感的电子设备——如手持终端、小型模块、高密度电路板等。
二、关键参数与结构设计
1. 核心参数梳理
产品基础参数明确且符合行业通用标准：
- 插针结构：1×6P（单排6针）；
- 间距：2mm（与同规格排母完全兼容）；
- 安装方式：弯插（针脚90°垂直弯折）；
- 触头材质：黄铜（H65）；
- 镀层：纯锡（厚度5-8μm）；
- 排数：1排，每排PIN数6。
这些参数无需额外适配设计，可直接替换同类竞品。
2. 结构设计特点
- 弯插空间优化：针脚垂直于排针本体弯折，焊接时贴附PCB侧面，相比直插排针减少30%以上垂直安装空间，适配“薄型化”设备需求；
- 精度控制：排针本体注塑成型，针脚间距精度±0.1mm，避免焊接错位；
- 插拔便利性：针脚末端倒角设计，插入排母时阻力降低40%，提升装配效率。
三、材质选型与性能优势
1. 触头材质与镀层逻辑
- 黄铜基底：选用H65黄铜，导电率58×10⁶S/m（接近纯铜），兼具良好导电性能与机械强度，可承受多次插拔不变形；
- 锡镀层优势：纯锡镀层焊接性优异（适配手工焊、回流焊），抗氧化性能优于裸铜，能在-40℃~125℃宽温范围保持稳定。
2. 核心性能指标
- 接触电阻：实测≤0.03Ω，满足信号无衰减传输；
- 插拔寿命：≥500次（黄铜针脚+锡镀层协同保障）；
- 耐温性：短期可承受260℃回流焊温度（符合IPC-A-610标准），长期工作温度覆盖工业/消费电子常见场景。
四、安装适配与工艺注意事项
1. 安装方式与适配
- 焊接方式：手工焊（烙铁温度350-380℃，焊接时间≤3s）或回流焊（温度曲线符合IPC标准）；
- 适配对象：同规格2mm间距1×6P排母，无需额外调整即可匹配使用。
2. 工艺注意事项
- 焊接时避免烙铁头直接接触镀层，防止锡层脱落；
- 安装前检查针脚是否弯折变形，错位需校正后再焊接；
- 批量生产建议用治具固定，确保针脚与焊盘对齐精度。
五、典型应用领域举例
X2016WR-06-N0SN的设计特点使其适配多场景：
- 工业控制：小型PLC输入输出接口、传感器模块（温度/压力传感器）信号连接；
- 消费电子：智能穿戴（手环/手表）电池/传感器接口、便携音箱控制模块连接；
- 汽车电子：车载辅助系统（倒车雷达控制器）小功率信号传输；
- 医疗设备：便携监护仪模块间连接（血氧模块与主机）。
该产品以“高性价比+稳定性能”为核心，是小间距紧凑连接场景的优选方案。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
