Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YXC OC322525MJBA4SA-18 Oscillator OC322525MJBA4SA
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YXC OC322525MJBA4SA-18
- Type
- YXC Yangxing Technology
- Minimum package
- 3000 未知
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YXC
- Electronic Component
- OC322525MJBA4SA-18
- Electronic Component
- 1
- Package
- SMD3225-4P
- Electronic Component
- Active Crystal Oscillator
- Electronic Component
- 0.1g
- Frequency
- 25MHz
- Electronic Component
- 1
- Electronic Component
- BM0230099674
- Operating Temperature
- 40℃~+125℃
- Operating Voltage
- 1.8V~3.3V
- Electronic Component
- ±10ppm
- Output
- CMOS
- Frequency
- ±80ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
OC322525MJBA4SA-18 产品概述
一、产品简介
OC322525MJBA4SA-18 是扬兴科技（YXC）YSO140TC 系列的一款高可靠性表贴晶体振荡器，中心频率 25.000 MHz，输出模式为 CMOS，适用于工业级温度与多电压供电系统。器件采用 SMD 3225-4P 小型封装（3.2 × 2.5 mm），具备宽工作电压范围和良好的频率稳定性，适合对时钟精度和环境适应性要求较高的嵌入式与通信应用。
二、主要特性
- 频率：25.000 MHz
- 输出模式：CMOS，直接驱动数字逻辑与 MCU/FPGA 输入
- 工作电压：1.8 V ~ 3.3 V（宽电压兼容，多平台适配）
- 常温初始频差（25°C）：±10 ppm
- 综合频率稳定度（含温度漂移、供电与老化）：±80 ppm
- 工作温度范围：-40°C ~ +125°C（工业级）
- 封装：SMD 3225-4P（小尺寸、适合自动贴装）
三、技术参数（典型）
- 频率：25 MHz
- 输出负载：CMOS 兼容（具体驱动能力参考厂方规格书）
- 启动时间、功耗与输出电平等详细指标，请参见扬兴科技完整数据手册
四、封装与引脚
- 封装形式：SMD 3225-4P，4 引脚表贴封装，适配常见贴片工艺与回流焊流程
- 外形尺寸：约 3.2 × 2.5 mm，厚度小，便于空间受限的板上布局
- 建议在 PCB 布局时：将地平面扩展至器件周边，VCC 旁近距离放置去耦电容（建议 0.1 µF），输出引脚 trace 最短并避免与噪声源并行走线
五、典型应用
- MCU/FPGA 时钟源、通信设备基准时钟
- 工业控制与测试设备、嵌入式系统、物联网终端
- 无线模块、网通设备与其他需要稳定 25 MHz 时钟的场景
六、使用注意事项
- 建议在电源引脚附近放置 0.1 µF 陶瓷去耦电容以抑制电源噪声；如需进一步改善信号完整性，可在输出线上并联或串联小阻抗（如 22~33 Ω）按实际测试调整
- 焊接/回流工艺应遵循厂方推荐的温度曲线以保证可靠性
- 在高噪声环境中，建议为 oscillator 提供独立地平面并远离高频开关电源与大电流回流路径
七、可靠性与采购信息
- 工业温度等级（-40°C 至 +125°C）适合长时间运行的严苛环境
- 批量采购、样品与技术支持请联系 YXC 扬兴科技授权代理或经销商；订货时请核对完整料号 OC322525MJBA4SA-18 及对应的工艺与测试报告以满足项目验证需求
如需该型号的引脚图、详细电气参数表或典型应用电路图，我可为您检索并整理厂方数据手册关键页，便于设计评估与样机验证。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
