Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YXC OT201610MJBA4SL Oscillator OT201610MJBA4SL
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- YXC OT201610MJBA4SL
- Type
- YXC Yangxing Technology
- Minimum package
- 3000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YXC
- Electronic Component
- OT201610MJBA4SL
- Electronic Component
- 1
- Package
- SMD2016-4P
- Electronic Component
- Active Crystal Oscillator
- Electronic Component
- 0.02g
- Frequency
- 10MHz
- Electronic Component
- 1
- Electronic Component
- BM0230878277
- Operating Temperature
- 40℃~+85℃
- Operating Voltage
- 1.8V~3.3V
- Electronic Component
- ±10ppm
- Output
- CMOS
- Frequency
- ±20ppm
- Electronic Component
- Electronic Component
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
OT201610MJBA4SL 产品概述
一、产品简介
OT201610MJBA4SL 是扬兴科技（YXC）提供的一款小型SMD晶体振荡器，标称频率 10.000MHz，面向工业等级时钟源需求。器件输出模式为 CMOS，工作温度覆盖 -40℃ 至 +85℃，适配多种低功耗和便携式电子系统。封装形式为 SMD2016-4P，适合高密度贴片组装。
二、主要规格
- 频率：10.000 MHz
- 常温频差（室温出厂校准）：±10 ppm
- 全温区频率稳定度：±20 ppm（-40℃ ~ +85℃）
- 输出模式：CMOS
- 工作电压：1.8 V ~ 3.3 V
- 工作温度：-40℃ ~ +85℃
- 封装：SMD 2016-4P（四引脚）
- 品牌：YXC 扬兴科技
（注：更多电气参数如输出电平、上升/下降时间、供电电流、启动时间等请以产品数据手册为准）
三、产品特性
- 工业级温度范围，频率稳定可靠，适合环境变化较大的应用场景。
- 宽电压供电兼容 1.8V 与 3.3V 系统，便于与 MCU、FPGA、通信芯片等直接驱动。
- CMOS 输出，驱动能力强，易于与数字逻辑接口匹配。
- 小尺寸 SMD2016-4P 封装，利于高密度 PCB 布局与自动化贴装。
四、典型应用
- 嵌入式系统与微控制器时钟源
- 网络与通信设备的本地振荡参考
- 测试测量仪器与基准时钟
- 消费电子与便携设备的定时模块
- 工业控制与数据采集系统
五、封装与引脚
OT201610MJBA4SL 采用 SMD2016-4P 四引脚表面贴装封装，体积小（约 2.0 mm × 1.6 mm），适合自动贴装生产。具体引脚功能、焊盘布局和外形尺寸请参阅扬兴科技提供的机械图与 PCB 推荐焊盘设计（数据手册中有详细引脚定义与推荐 land pattern）。
六、设计与应用注意事项
- 在 VCC 引脚附近放置去耦电容（如 0.1 μF），以抑制电源噪声并保证输出稳定。
- 输出线与敏感模拟信号保持隔离，减少干扰耦合。
- PCB 布局建议使用完整接地平面，缩短电源与地回路路径。
- 遵循厂商推荐的回流焊温度曲线与 IPC/JEDEC 标准进行焊接与回流处理。
- 对需严格时钟精度的系统，留意整体系统误差来源（布线、电源纹波、上电顺序等）。
七、质量与可靠性
产品由 YXC 扬兴科技出厂，通常提供出货前电气测试与筛选，符合 RoHS 等常规环保要求。对于特定可靠性、加速寿命测试或更高等级的认证要求，请联系厂商获取测试报告与定制服务。
八、采购买型与技术支持
型号：OT201610MJBA4SL（亦可查询 YSO110TR 系列相关管脚或规格）。如需样品、批量报价、数据手册或 PCB 封装文件（CAD/GERBER），建议直接联系扬兴科技或其授权代理商获取最新版资料与技术支持。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
