Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YANGJIE MB10S
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- YANGJIE MB10S
- Type
- MBS
- Minimum package
- 2500 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YANGJIE
- Electronic Component
- MB10S
- Electronic Component
- 1
- Package
- MBS
- Electronic Component
- 0.237g
- Electronic Component
- 1
- Electronic Component
- BM0228719265
- Electronic Component
- Electronic Component
- Electronic Component
- 2500
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
MB10S（YANGJIE 扬杰）产品概述
一、产品简介
MB10S 是一款单相桥式整流器，品牌为 YANGJIE（扬杰），封装为 MBS。器件面向高电压、小功率整流场景，具有高反向耐压和低反向漏电流的特点，适用于交流到直流的整流、偏置电源和高压辅助电路。
二、主要电气参数
- 正向压降：Vf ≈ 1.0 V @ 400 mA（注意：工作电流接近规格上限时正向压降会有所上升）
- 直流反向耐压：Vr = 1 kV（1000 V）
- 平均整流电流：Io = 800 mA
- 反向电流：Ir = 5 µA @ 1 kV（在高压下仍能保持较低漏电）
- 非重复峰值浪涌电流：Ifsm = 30 A（半正弦波1 次浪涌，通常用于启动或短时冲击）
- 工作结温范围：Tj = -55 ℃ ~ +150 ℃
三、封装与热特性
MBS 小外形封装便于印刷电路板安装。器件在 800 mA 连续工作时属于中低功耗范围，但正向压降产生的功耗（P = Vf × I）仍需考虑散热与环境温度。高结温下反向漏电流会增加，建议对功耗进行适当降额与热管理（保持良好通风或在板上安排散热铜箔）。
四、典型应用
- 高频开关电源的高压偏置或辅助整流
- 高压供电、LED 驱动器的前级整流（小电流场合）
- 仪表、电源模块的极性保护与整流桥电路
- 工业控制与安防设备中对高反压要求的整流场合
五、选型与使用建议
- 反向耐压选择：实际线路峰值电压应留有余量，建议工作电压不超过器件 Vr 的 60%~80% 以提高可靠性。
- 浪涌管理：Ifsm = 30 A 适合短时冲击，若系统存在频繁大浪涌或长时间浪涌（如充电电容器起充电浪涌），应增加限流电阻、NTC 或浪涌保护器（MOV、TVS）。
- 漏电控制：高压下 Ir 虽低但在高温或长期工作时会上升，关键应用请评估漏电对系统的影响并做绝缘隔离。
- PCB 布局：整流桥输入端保持足够爬电距离，输出端设旁路电容并靠近负载。对散热关键位置做铜箔加厚或散热通道。
- 备用裕量：在设计连续工作电流接近 800 mA 时考虑 10%~20% 的电流降额，延长寿命并降低热应力。
六、可靠性与注意事项
器件适应工业温度范围，长期高温会加速老化并增加漏电。焊接时遵循厂商推荐的回流曲线，避免过高回流峰值温度；存储与安装应防潮防静电，保证封装完整无裂纹。
七、总结
MB10S（YANGJIE，MBS 封装）是一款面向高耐压、小功率整流应用的桥式整流器，具有 1 kV 反向耐压、低反向电流和 800 mA 的平均整流能力。适用于需要高耐压且对漏电有较高要求的电源和控制电路。在实际应用中注意散热、浪涌保护和电压降额，可以获得稳定可靠的工作表现。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
