Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
YANGJIE ABS10
Configuration
1 options
Configuration
Date code within 2 years
Available for RFQ
Technical data
Product details
13
specifications
Core information
- Product name
- YANGJIE ABS10
- Type
- ABS
- Minimum package
- 4000 圆盘
Technical parameters
- Electronic Component
- Electronic Component
- Electronic Component
- YANGJIE
- Electronic Component
- ABS10
- Electronic Component
- 1
- Package
- ABS
- Electronic Component
- 0.182g
- Electronic Component
- 1
- Electronic Component
- BM0230005013
- Electronic Component
- Electronic Component
- Electronic Component
- 4000
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
ABS10 产品概述
一、产品简介
ABS10 为扬杰（YANGJIE）出品的单相整流桥，面向中高电压、小到中等电流的整流场景。器件在 500mA 条件下正向压降仅 0.95V，直流反向耐压达到 1kV，直流整流电流 1A，反向电流在 1kV 时仅 5µA，具有良好的高压耐受性和低漏电特点，适用于需要高耐压与低泄漏的电源和测量线路。
二、主要特性
- 直流反向耐压（Vr）：1000V，适合高压整流场合；
- 正向压降（Vf）：0.95V @ 500mA，低压降可减小整流损耗（在 500mA 时P≈0.475W）；
- 额定整流电流：1A，满足一般小功率整流需求；
- 反向漏电流：5µA @ 1kV，适合对漏电敏感的高压电路；
- 冲击电流（Ifsm）：35A（非重复峰值），能耐短时浪涌电流（如充电浪涌）；
- 工作结温：-55℃ ~ +150℃，适应宽温度工作环境；
- 封装：ABS 塑封，便于通用安装和绝缘。
三、电气与热性能提示
- 在 500mA 工作点功耗约为 0.475W，若长期以接近 1A 运行，则需注意正向压降可能上升、功耗增加，需做好散热设计；
- 非重复峰值 35A 适用于短时浪涌，但不能作为长期过载指标；频繁浪涌会加速结温升高并影响寿命；
- 反向漏电 5µA 在高压测量或高阻抗输入非常有利，但在需极低泄漏的精密仪表仍需评估整体电路影响；
- 封装为 ABS 塑料，热阻与金属封装不同，推荐通过增加 PCB 铜箔面积或加装散热片改善热散。
四、典型应用场景
- 高压直流电源前端整流；
- 仪表与测量设备的整流模块（需低漏电场合）；
- 小功率电源适配器、工业控制电源；
- 灯具驱动、传感器供电以及其他需 1kV 级直流耐压的场合。
五、使用与选型建议
- 为保证可靠性，长期工作电流建议在额定 1A 以下并考虑环境温度及散热，必要时采用合适的 PCB 散热铜箔或外加散热体；
- 若整流侧带有大容量滤波电容，需注意充电浪涌电流，确认 Ifsm 能承受短时峰值或在电路中加入限流/NTC 元件；
- 在高压应用中，预留安全间距与绝缘处理，避免爬电与击穿；
- 若对反向恢复时间、噪声有更严格要求，请在选型时确认该型号的开关特性或考虑专用快速/肖特基器件替代。
六、小结
ABS10（YANGJIE）是一款面向高耐压、低泄漏、1A 级整流需求的单相桥堆，具有 1kV 耐压与良好浪涌能力，适用于高压整流与一般电源场合。选用时应关注散热与浪涌管理，并按照具体应用环境进行合适的电气与机械防护设计。若需更详细的封装尺寸、热阻或开关特性，请参考厂商数据手册或联系供应商获取完整规格书。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
