Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Broadcom HSMA-C110
Configuration
1 options
Configuration
25+
Available for RFQ
Technical data
Product details
20
specifications
Core information
- Product name
- Broadcom HSMA-C110
- Type
- BROADCOM
- Unit
- Electronic Component
- Minimum package
- 3000 圆盘
Technical parameters
- Power
- 60mW
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- Electronic Component
- BROADCOM
- Electronic Component
- HSMA-C110
- Electronic Component
- 1
- Package
- 2-SMD
- Electronic Component
- 592nm
- Electronic Component
- LEDDiode / LED
- Electronic Component
- 0.03g
- Electronic Component
- 1
- LED
- 95mcd
- LED
- 130°
- LED
- Electronic Component
- Electronic Component
- BM0257801111
- Electronic Component
- 595nm
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
HSMA-C110 产品概述
HSMA-C110 是 Broadcom（博通）推出的一款琥珀色扩散型贴片灯珠，采用无引线 2-SMD 芯片封装，适用于各种指示、显示与背光场合。器件在 25mA 驱动条件下具有良好的光效与视角特性，工作温度范围宽，便于自动贴装与大批量生产应用。
一、主要特性
- 发光颜色：琥珀色（Amber），视觉温和、对比度好。
- 封装形式：2-SMD 无引线（chip SMD），适配自动贴片工艺。
- 扩散表面：扩散封装提供均匀光输出，减少眩光与热点。
- 品牌：Broadcom（博通），器件一致性与可靠性较好。
二、光电参数（典型值）
- 正向压降 Vf：1.9 V（典型）
- 正向电流 If：25 mA（最大／标称驱动）
- 功率耗散：60 mW
- 峰值波长：595 nm，中心波长约 592 nm
- 发光强度：95 mcd（典型）
- 发光角度：130°（扩散型，视野宽广）
- 工作温度：-40 ℃ 至 +85 ℃
三、热管理与可靠性
HSMA-C110 的热耗散相对较小，但在高环境温度或密集封装时仍需注意散热设计。建议：
- 在 PCB 上为 LED 提供良好的铜箔散热路径，减少结温升高。
- 满载（25 mA）长期工作时参考厂商老化/降额曲线，必要时降低驱动电流以延长寿命。
- 遵循 Broadcom 推荐的回流焊工艺参数进行焊接，避免超温或过长时间暴露在高温下。
四、封装与安装建议
- 适用于常规 SMT 自动贴装与回流焊接流程。
- 使用前请参考原厂推荐的 PCB pad 布局与锡膏量，以保证焊点可靠性与光学一致性。
- 注意 ESD 防护与防潮保存，未焊接前应按厂家规定进行防潮袋保存与烘烤处理（如为湿敏元件）。
五、典型应用场景
- 工业与民用指示灯（状态指示、报警面板）
- 家电与消费电子（按键指示、面板背光）
- 仪器仪表与通信设备指示
- 交通信号、标识灯（非高功率照明场合）
六、使用注意事项与驱动建议
- LED 为电流驱动器件，推荐使用恒流源或在串联电阻控制下驱动，避免过流导致寿命下降。
- 在设计时考虑环境温度对发光强度和正向电压的影响，必要时做温度补偿或降额设计。
- 遵守 ESD 安全规范，避免在无 ESD 保护的环境中直接接触焊盘或芯片表面。
- 若对光色一致性、亮度稳定性有较高要求，建议按批次进行颜色与亮度筛选或采用 bin 分级元件。
七、选型建议
HSMA-C110 适合需要中等亮度、宽视角且色调偏琥珀的指示应用。若项目对光通量、色容差或极端环境能力有更高要求，请与 Broadcom 原厂资料比对具体 bin 值与老化曲线，或考虑更高功率/更严格规格的替代型号。总体而言，HSMA-C110 在自动化生产与通用指示领域具有成本与性能上的平衡优势。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
