Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FOJAN FRC0603F3302TS
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- FOJAN FRC0603F3302TS
- Type
- FOJAN
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- FOJAN
- Electronic Component
- FRC0603F3302TS
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.023g
- Electronic Component
- 33kΩ
- Electronic Component
- 1
- Electronic Component
- BM0264521531
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FRC0603F3302TS 贴片厚膜电阻产品概述
一、产品基本定位
FRC0603F3302TS是富捷电子（FOJAN）推出的0603封装通用贴片厚膜电阻，针对小型化、常规功率需求的电子电路设计，兼顾成本控制与性能稳定性，适用于消费电子、工业控制、通信等多领域的基础电路场景。
二、核心参数与性能解析
该产品的关键参数明确了其适用边界，具体解析如下：
- 阻值与精度：标称阻值33kΩ，精度±1%（实际阻值偏差≤±330Ω），满足信号调理、分压电路对阻值一致性的要求；
- 功率与电压：额定功率100mW，最大工作电压75V，实际电路中需注意功耗不超100mW（对应最大电流≈1.73mA，(I=\sqrt{P/R})），避免过功率损坏；
- 温度特性：温度系数±100ppm/℃，即温度每变化1℃，阻值波动±3.3Ω（33kΩ×100×10⁻⁶），在宽温范围内阻值可控；
- 工作温度范围：覆盖-55℃+155℃，超出常规工业级（-40℃+85℃）上限，适配高温作业设备（如汽车电子、工业加热模块）。
三、封装与工艺优势
- 0603小型化封装：尺寸为0.06英寸×0.03英寸（约1.6mm×0.8mm），符合贴片元件小型化趋势，适配手机、智能穿戴等紧凑型设备的PCB布局；
- 厚膜工艺特性：采用印刷烧结工艺形成厚电阻膜层，兼具阻值范围宽、耐过载能力强、成本适中的特点，适合批量生产与常规应用。
四、典型应用场景
结合参数与封装特点，该电阻主要应用于：
- 信号调理电路：运算放大器反馈网络、传感器信号放大电路，稳定阻值保障信号准确性；
- 电源分压检测：小型电源模块电压分压（如5V转3.3V）、电池电压检测，100mW功率满足低电流需求；
- 消费电子终端：手机触摸传感器、耳机接口保护电路，0603封装适配设备小型化；
- 工业控制模块：PLC输入输出接口、温度采集电路，宽温范围保障工业环境可靠性；
- 小型LED驱动：LED指示灯限流电阻，低功率与小封装适配紧凑布局。
五、可靠性与质量保障
- 环境适应性：通过耐温、耐湿、抗振动测试，符合IEC 61000标准，复杂环境下长期稳定；
- 品牌质量：富捷电子产品通过RoHS 2.0、REACH认证，批量供货一致性好，适配OEM/ODM量产；
- 焊接可靠性：标准贴片焊盘设计，适配回流焊、波峰焊工艺，焊接良率高。
六、总结
FRC0603F3302TS作为通用型0603厚膜电阻，以33kΩ±1%精度、100mW功率、宽温工作范围为核心优势，结合小型化封装与成熟工艺，是平衡性能与成本的理想选择，可覆盖多领域常规电路需求。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
