Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
FOJAN FRC0603F3601TS
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- FOJAN FRC0603F3601TS
- Type
- FOJAN
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- FOJAN
- Electronic Component
- FRC0603F3601TS
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.023g
- Electronic Component
- 3.6kΩ
- Electronic Component
- 1
- Electronic Component
- BM0264520402
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
FRC0603F3601TS 厚膜贴片电阻产品概述
一、产品定位与核心价值
FRC0603F3601TS是富捷（FOJAN） 推出的一款0603封装厚膜贴片电阻，针对小型化电子电路设计，平衡了体积紧凑性、精度可靠性、成本可控性三大核心需求，适用于消费电子、工业控制、通信设备等对空间敏感的场景，是批量应用的高性价比选择。
二、关键技术参数详解
该电阻的核心参数均经过严格测试，满足主流电子电路的性能要求：
参数类别 具体规格 说明 阻值与精度 3.6kΩ ±1% 标识代码「3601」对应36×10²Ω，±1%精度覆盖工业/消费类电路的中等误差需求 额定功率 100mW（0.1W） 适合小电流信号调理、滤波等低功耗场景 最大工作电压 75V 电压降额后可长期稳定工作 温度系数（TCR） ±100ppm/℃ 温度每变化100℃，阻值变化±0.1%，宽温下性能稳定 工作温度范围 -55℃ ~ +155℃ 覆盖工业级环境，适配极端温度场景 封装规格 0603英制（1.6mm×0.8mm） 表面贴装设计，兼容回流焊/波峰焊工艺三、工艺与可靠性特点
- 厚膜工艺优势：采用厚膜丝网印刷技术制造，相比薄膜电阻成本更低，且具有良好的抗电涌、抗机械应力能力，适合批量生产；
- 焊接兼容性：焊盘设计符合IPC-A-610标准，焊接后附着力强，减少虚焊/假焊风险，适配回流焊（峰值温度≤260℃）、波峰焊（温度≤250℃）；
- 宽温可靠性：-55℃至+155℃的工作范围，可满足汽车电子、工业车间等温度波动大的场景，长期使用阻值漂移极小。
四、典型应用场景
该电阻因体积小、精度稳定，广泛应用于以下领域：
- 消费电子：手机、平板、智能穿戴的信号滤波、分压电路，适配紧凑内部空间；
- 工业控制：PLC、传感器接口的信号调理，宽温特性适应车间环境；
- 通信设备：射频前端匹配网络、电源模块辅助电阻，满足小功率需求；
- 汽车电子：仪表背光调节、传感器信号处理（低功耗辅助电路），适配车载温度变化。
五、使用注意事项
- 功率降额：实际负载功率建议不超过80mW（额定100mW的80%），避免长期过载导致阻值漂移；
- 焊接规范：回流焊时间≤10秒，波峰焊时间≤3秒，防止高温损坏电阻；
- 存储条件：未焊接电阻存储于常温（15~35℃）、干燥（相对湿度≤60%）环境，避免受潮影响焊接；
- 选型匹配：若需更高精度（±0.1%）或更高功率，需切换对应规格；工作电压超75V时，需并联或选高耐压型号。
六、品牌与质量保障
富捷（FOJAN）作为国内电子元器件主流供应商，该电阻通过RoHS、REACH环保认证，批量产品一致性好，可提供样品测试支持，适合中小批量到大规模生产的需求。
综上，FRC0603F3601TS是一款兼顾性能与成本的厚膜贴片电阻，是小型化电子电路的可靠选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
1 Piece BGA Integrated Circuit Chipset MN864739 CXD90061GG CXD90062GG PS5 QFN-80
- Model
- MN864739
- Package
