Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Walsin WR06X512JTL
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- (Walsin) WR06X512JTL
- Type
- WALSIN
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- (WALSIN)
- Electronic Component
- WR06X512JTL
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±5%
- Electronic Component
- 0.035g
- Electronic Component
- 5.1kΩ
- Electronic Component
- 1
- Electronic Component
- BM0264880596
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- ±100ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
WR06X512JTL 厚膜片式电阻产品概述
一、产品基本信息
WR06X512JTL是华新科（Walsin） 推出的厚膜片式固定电阻，采用0603英寸表面贴装封装（公制尺寸1.6mm×0.8mm），属于高可靠性小型化电阻系列，针对通用电路的信号处理、分压、滤波等场景优化设计，兼顾性能与成本优势。
二、核心电气参数
该电阻的关键参数明确且适配多数通用电路需求：
- 阻值与精度：额定阻值5.1kΩ，精度等级±5%（型号中“J”标识），满足工业、消费电子等领域的误差要求；
- 功率规格：额定功率100mW（1/10W），常温下可稳定承载该功率，高温环境需遵循降额曲线；
- 工作电压：最大工作电压75V，避免小信号电路中因电压击穿导致失效；
- 温度系数：±100ppm/℃，表示温度每变化1℃，阻值变化约0.01%，长期稳定性优异；
- 工作温度范围：-55℃至+155℃，覆盖工业级、部分车载级温度需求，适应极端环境。
三、封装与物理特性
0603封装是电子行业主流小型化封装，物理特性如下：
- 尺寸：1.6mm（长）×0.8mm（宽）×0.45mm（厚，典型值），大幅节省PCB空间，支持设备轻薄化设计；
- 工艺：采用厚膜丝网印刷+烧结技术，电阻膜层均匀、附着力强，抗机械应力性能好；
- 兼容性：适配自动贴片机高速组装，降低生产制造成本，适合批量应用。
四、典型应用场景
因小体积、宽温特性及稳定性能，该电阻广泛用于：
- 消费类电子：智能手机、平板、智能穿戴的电源滤波、信号分压、LED驱动辅助电路；
- 工业自动化：传感器信号调理模块、PLC输入输出接口、小型电机控制电路；
- 通信设备：小型基站、路由器、交换机的射频匹配网络、信号衰减电路；
- 车载电子：车载中控系统、低温传感器节点（-40℃以下仍稳定工作）。
五、产品核心优势
- 宽温可靠性：-55℃~+155℃的工作范围，优于普通民用级电阻，适应高低温交替环境；
- 小体积高密度：0603封装支持PCB高密度布局，满足设备小型化趋势；
- 性能稳定：厚膜工艺使阻值一致性好，温度系数低，长期使用漂移小；
- 高性价比：华新科成熟工艺平衡成本与可靠性，适合批量采购；
- 电压耐受：75V工作电压覆盖多数小信号电路需求，无需额外降额。
六、选型与使用注意事项
- 型号解读：WR06X=华新科0603厚膜系列，512=阻值代码（51×10²=5.1kΩ），J=±5%精度，TL=封装/系列后缀；
- 功率降额：环境温度>70℃时需降额（如125℃时降额至50%），避免过热损坏；
- 焊接规范：回流焊峰值温度≤260℃（时间≤10s），波峰焊温度≤245℃；
- 存储条件：常温干燥环境（-20℃~+40℃，湿度≤60%），开封后3个月内使用，避免受潮；
- 静电防护：表面贴装电阻对静电敏感，组装需用防静电工作台、离子风扇。
该产品凭借华新科的工艺优势，在通用电子领域具有广泛适配性，是小信号电路的可靠选择。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
