Model & package intelligence
Model text, package form, tray or reel details, and visual evidence are reviewed together before RFQ feedback.
Walsin WR06X0000FTL
Configuration
1 options
Configuration
26+
Available for RFQ
Technical data
Product details
19
specifications
Core information
- Product name
- (Walsin) WR06X0000FTL
- Type
- WALSIN
- Minimum package
- 5000 圆盘
Technical parameters
- Power
- 100mW
- Electronic Component
- Electronic Component
- Electronic Component
- (WALSIN)
- Electronic Component
- WR06X0000FTL
- Electronic Component
- 1
- Package
- 0603
- Electronic Component
- SMD Resistor
- Electronic Component
- ±1%
- Electronic Component
- 0.035g
- Electronic Component
- 0Ω
- Electronic Component
- 1
- Electronic Component
- BM0264396909
- Operating Temperature
- 55℃~+155℃
- Operating Voltage
- 75V
- Electronic Component
- 200ppm/℃~+400ppm/℃
- Resistor Type
- Resistor
For datasheets, package documents, compatible-part guidance, or other technical resources, contact WMSIC customer service. Availability is confirmed case by case.
WR06X0000FTL 零欧姆厚膜电阻器产品概述
一、产品核心定位与封装规格
WR06X0000FTL是华新科（Walsin） 推出的一款表面贴装零欧姆厚膜电阻器，核心作用是替代传统手工跳线，适配自动化SMT生产工艺。其封装规格为0603英寸（公制1608），即尺寸为1.6mm×0.8mm，符合行业标准SMD封装要求，可兼容常规SMT贴片机的贴装精度，适用于高密度PCB设计场景。
二、关键电气与物理参数解析
该产品的核心参数直接决定应用场景与可靠性，具体如下：
- 阻值与精度：标称阻值为0Ω，精度标注±1%——此处精度反映生产工艺的导通一致性，避免因波动导致开路风险；
- 功率与电流：额定功率100mW，对应最大持续工作电流1A（由封装散热与厚膜工艺极限决定，需避免过流）；
- 电气耐压：最大工作电压75V，满足常规低压电路耐压需求，防止高压击穿；
- 温度特性：温度系数（TCR）为**-200ppm/℃~+400ppm/℃**，反映厚膜工艺下寄生电阻随温度的变化特性；
- 工作温度范围：-55℃~+155℃，覆盖工业级温度要求，可在极端环境下稳定工作。
三、工艺与可靠性优势
作为厚膜零欧电阻，WR06X0000FTL具备以下特点：
- 厚膜工艺优势：采用厚膜印刷技术，成本低、批量一致性好，适合大规模生产；
- 导通可靠性：表面贴装无引脚，避免传统跳线的焊接接触不良，抗振动、抗冲击能力更强；
- 耐温性：宽温范围适配车载、工业控制等极端环境；
- 低寄生电阻：实际寄生电阻远小于常规电阻最小阻值，减少电流通路压降损耗。
四、典型应用场景
零欧姆电阻的核心是实现“逻辑导通”，该产品典型应用包括：
- SMT跳线替代：替代手工跳线，提升生产效率，降低人工成本；
- 调试与配置：作为临时测试点或配置点，通过焊接/移除实现电路功能快速切换；
- 低阻电流通路：用于电源输出、信号接地等低压降链路，减少功率损耗；
- 高密度设计：0603小封装适配手机、小型工业模块等高密度PCB。
五、选型与使用注意事项
为确保可靠性，使用需注意：
- 电流功率匹配：持续电流≤1A，瞬时脉冲电流参考官方datasheet；
- 电压限制：工作电压≤75V，避免高压击穿；
- 温度环境：使用环境需在-55℃~+155℃内，超出需降额；
- 贴装工艺：焊盘符合0603标准（推荐长1.82.0mm、宽1.01.2mm），避免虚焊。
该产品兼顾成本与可靠性，是SMT工艺中跳线替代的优选方案，适用于消费电子、工业控制、汽车电子等多领域。
Request for quote
Send RFQ
Use the form for single models, category sourcing, and multi-line BOM requirements.
Product sourcing intelligence
Model, package, availability, and BOM fit reviewed before quotation.
WMSIC turns product data, package visuals, BOM context, and sourcing signals into practical RFQ notes for buyers.
BOM matching & alternatives
BOM lines are compared by package, parameters, quantity, and workable alternatives for cleaner sourcing decisions.
Sourcing availability signal
Stock routes, quotation confidence, lead-time notes, and shipment feasibility are checked before sales follow-up.
Buyer sourcing scenarios
Examples of how common component sourcing requests are organized.
Typical RFQ scenarios based on the WMSIC form fields, catalog data, manual review steps, and shipment preparation workflow.
The buyer shares the full part number, package requirement, quantity, destination, and available product photos so the quotation can record the exact version under review.
A multi-line BOM is organized into direct sourcing lines, lines that need package clarification, and lines where alternative-part review is permitted.
The original manufacturer part number, datasheet revision, application, critical limits, and acceptable changes are collected before possible candidates are discussed.
Sample quantity, minimum packing, package format, target date, and courier destination are kept together in one RFQ conversation.
Package photos, model markings, board context, and the quantity needed for repair help focus the sourcing review on the relevant version.
When a suffix or package note is incomplete, the response records the open difference and requests buyer confirmation before procurement proceeds.
Packing format, carton notes, invoice details, courier option, destination, and tracking handoff are coordinated around the confirmed order.
The request connects the previously used model, current demand, package evidence, target timing, and replenishment sourcing route.
Related products
Packaged components ready for RFQ.
